
Voltage Range
24V DC
Cut Points
5 cm
LED Strip Installation
10 m
Type Of Dimming
Controller
IP Rating
IP20
Battery Operated
No
Dimensions
3 mm x 8 mm x 5 m
Width
8 mm
Height
3 mm
Luminous Efficiency
155 lm/W
Fitting Material
PCB
Colour Rendering Index
80
Dimmable
Yes
Working Temperature
-25 °C~+60 °C
Ref. Ledkia: 95466
5 out of 5 stars
Colour Temperature Warm White 3000K
Before £16.39
£7.79
VAT includedPre-Order, estimate delivery from 90 days
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentDimensions
Downloads
Technical Data Sheet PDF
manual_tiras_led_6_idiomas
DoC_95466_198411
Certificates and Stamps
Technical Specifications
Electrical Features
Mechanical Features
Product Information
LED Features
Materials and Finishes
Driver Information
The 5m 24V DC High Lumen LED Strip 160LED/m 8mm Wide cut at Every 5cm IP20 is a popular choice if you want to have a decorative light that consumes very little power. Its flexible design adapts to any location where it will add a touch of colour.
Features of the 5m 24V DC High Lumen LED Strip 160LED/m 8mm Wide cut at Every 5cm IP20
This 5m 24V DC High Lumen LED Strip 160LED/m 8mm Wide cut at Every 5cm IP20 has a length of 5 metres and integrates 800 highly efficient SMD2835 technology LEDs that only consume 10W per metre. The bright and colourful light it emits is spread over an angle of 120º. It requires a power supply to operate.
The LED Strip is made of PCB.
Advantages of the 5m 24V DC High Lumen LED Strip 160LED/m 8mm Wide cut at Every 5cm IP20
Thanks to its extra flat design, this type of LED lighting achieves an ideal lighting effect for all types of projects with minimal visual impact. An interesting option is to integrate it into a profile or moulding for a more professional finish.
The versatility of the 5m 24V DC 160LED/m IP20 High Lumen LED Strip 8mm Wide Cut at every 5cm allows for a variety of applications such as accent lighting, decorative lighting or wayfinding. It sees a lot of use in spaces such as corridors, showcases, shelves, shop windows, pictures, mirrors, etc.
*For a correct functioning and to avoid incidents, the connections must be protected with an insulating element against humidity and water.
*LED strips should never be switched on when they are wound up, as this could cause overheating and burn out the LEDs.
*If you are going to install more than 5 continuous metres of this LED strip, it is necessary to cut the jack connector and make a direct connection.
*The customer’s visual perception of sizes, colors, or textures may be affected by factors such as lighting, screen calibration, or the device used. For this reason, the images are merely illustrative and may not fully reflect the product’s actual characteristics. Please note that some of the ambient photographs shown on the website correspond to real environments, while others may have been generated or edited using artificial intelligence. In no case do they constitute an exact representation of the product or intend to mislead. To learn about the product’s real characteristics, please refer to the technical sheet and product description.