RF-DMX512 Controller for RGB/RGBW SKYDANCE XS

Controller for RGB/RGBW lighting with DMX dimming, designed to interface RF control to DMX512 systems. Operates from 5 V DC to 24 V DC and integrates compact housing for streamlined integration in technical lighting projects.

General information about RF-DMX512 Controller for RGB/RGBW SKYDANCE XS

This device functions as a dedicated controller to bridge radio-frequency control with DMX512 for RGB/RGBW luminaires, enabling precise control and regulation across projects that require DMX signalling. It is powered in low voltage DC and outputs DMX512, fitting into professional lighting architectures where integration and clean configuration are essential.

Built by SKYDANCE, it focuses on reliable connectivity between RF commands and the DMX bus. The compact enclosure supports neat placement within control enclosures or near drivers, helping electricians and designers implement structured lighting control without altering the existing DMX topology.

Use and applications

This unit manages RGB/RGBW colour channels via dimming over DMX512, acting as the link between RF trigger and the DMX line. In technical lighting upgrades or new builds, it suits projects where consistent control and straightforward integration to the DMX network are required, thanks to its DC supply range and dedicated DMX512 output.

Operation relies on low-voltage power and standard DMX wiring practices; follow the indicated polarity and line terminals for the DMX bus. The solution streamlines commissioning by concentrating the configuration on the DMX address plan and the RF-to-DMX bridge, reducing setup friction in multi-zone scenes driven by DMX.

Key benefits

• Consistent RGB/RGBW colour management thanks to DMX signalling.
• Flexible project integration por its DC supply range and dedicated DMX output with structured connectivity.
• Clean wiring and tidy installations mediante compact dimensions that aid professional installation.
• Reliable control flow thanks to the RF-to-DMX bridge, optimising regulation in lighting systems.
• Professional compliance supported by recognised certifications that reinforce system safety.

Highlighted specifications

Tension: 5 V DC, 12 V DC, 24 V DC; Tipo de regulación: DMX; Dimensiones: 18 mm x 97 mm x 33 mm; Temperatura de funcionamiento: -30 °C a +65 °C.

Installation and maintenance

Proceed with installation as indicated by the connection diagram: supply the unit with DC power within the stated range and wire the DMX bus observing A/B/GND terminals and correct polarity. Maintain cable segregation between power and signal where possible to ensure tidy installation and stable cableado. After wiring, verify addressing and perform basic configuration on the DMX line before final commissioning. Disconnect the power supply before any intervention.

Specialized lighting distribution in United Kingdom. If you are looking to buy RF-DMX512 Controller for RGB/RGBW SKYDANCE XS with a professional warranty, it is a leading choice for durability and efficiency. Estimated shipping in 15 to 20 days (subject to stock availability). Quality certified by CE, EMC, RED, RoHS for professional installations and projects. Check price and availability here.

Frequently asked questions

• What power supply is required — A DC source within the specified voltage range is needed; verify polarity before connection.
• How is the DMX line connected — Use the designated A, B and GND terminals and follow standard DMX512 wiring practices.
• Does it control RGBW channels — It outputs DMX512, which carries channel data for RGB/RGBW fixtures managed by the DMX system.
• What should be checked during commissioning — Confirm addressing on the DMX network, continuity of the bus, and correct DC input.
• Where can I find compliance details — Refer to the listed certifications to validate suitability for professional projects.