Round Adjustable LED Downlight OSRAM Chip LIFUD Ø200mm Cut Out

Adjustable circular LED downlight with a 60° beam angle and UGR <17, equipped with an OSRAM chip. It incorporates a LIFUD No Flicker driver, confirmed for stable operation in residential and professional projects.

General information about the Adjustable Circular LED Downlight OSRAM Chip LIFUD Cut-Out Ø 200 mm

Constructed from aluminium with a black finish, this downlight features a robust body and an adjustable design that makes it easy to direct the beam where needed. It integrates an OSRAM light source, renowned for its reliability, and uses a LIFUD No Flicker driver that promotes stable electrical performance in continuous use. The declared environmental protection is governed by the available ingress protection rating. For light quality, it offers glare control with UGR <17 and colour rendering with CRI 85. The family belongs to the Circello series.

Use and application

Suitable for indoor use according to the usage classification, its directional design allows you to highlight specific areas in shops, hotels, restaurants, corridors and workspaces where visual comfort is required. The permitted ambient operating temperature is -20 °C~+65 °C, which provides operating margin in air-conditioned spaces or with thermal variations typical of interiors. The black finish and circular shape support aesthetic integration into modern ceilings and technical environments.

Key benefits

• Black aluminium body, durable with a professional appearance.
• 60° optics for a defined and controlled beam.
• OSRAM chip for sustained luminous reliability.
• LIFUD No Flicker driver that reduces perceptible flicker.
• UGR <17 for greater visual comfort during prolonged tasks.
• Power factor 0.97 that supports electrical system efficiency.

Highlighted specifications

Dimensions: 150 mm x Ø230 mm; Cut-out dimensions: Ø200 mm; Shape: circular; Colour: black; Series: Circello.

Installation and maintenance

Recessed ceiling mounting according to the indicated installation system, using the Ø200 mm cut-out for a precise fit. Mains connection at 220–240 V AC within the nominal range 100 V–265 V, carried out by qualified personnel and in accordance with current regulations. Keep aluminium surfaces clean with a dry cloth and, if necessary, slightly dampened; avoid abrasive products. Periodically check the retaining clips and the correct orientation of the assembly. Disconnect the power before any intervention.

Technical content verified to facilitate purchasing decisions and project specification.

Frequently asked questions

• How is it installed? Recessed in the ceiling with a Ø200 mm cut-out.
• Does it include a sensor? No sensor type is stated.
• What certificates does it have? CE, RoHS and UKCA.
• What is the service life? 40,000 hours according to the declared data.