
Voltage Range
12V DC
Cut Points
5 cm
LED Strip Installation
5 m
Type Of Dimming
Controller
IP Rating
IP68
Battery Operated
No
Dimensions
5 mm x 12 mm x 5 m
Width
12 mm
Height
5 mm
Fitting Material
PCB, Resin, Silicone
Dimmable
Yes
Working Temperature
-20 °C~+50 °C
Ref. Ledkia: 107917
5 out of 5 stars
Light Colour RGB
Before £33.99
£16.39
VAT includedIn Stock, delivery in 24/48h
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentDimensions
Downloads
Technical Data Sheet PDF
manual_tiras_led_6_idiomas
DoC_107917_220110
Certificates and Stamps
Technical Specifications
Electrical Features
Mechanical Features
Product Information
LED Features
Materials and Finishes
Driver Information
The 5m 12V DC SMD Silicone FLEX LED Strip 60LED/m 12mm Wide Cut at Every 5cm IP68 is an excellent choice for those who want versatile and colourful decorative lighting. Its flexible design adapts to any location where you want to add a personalised touch of colour.
Features of 5m 12V DC SMD Silicone FLEX LED Strip 60LED/m 12mm Wide Cut at Every 5cm IP68
The 5m 12V DC SMD Silicone FLEX LED Strip 60LED/m 12mm Wide Cut at Every 5cm IP68 has a length of 5 metres and integrates 300 high efficiency SMD5050 technology LEDs. The RGB LEDs allow for a wide range of colours, allowing you to customise the lighting to your liking. The bright light it emits is distributed at an angle of 120°. In addition, the electronics of the LED Strip is coated with epoxy resin, which protects it from shocks and moisture. Therefore, the IP68 protection factor makes this LED lighting perfect not only for outdoor use, but also for underwater use.
This LED strip can be cut every 5 cm, which allows full utilisation and perfect adaptation to the required length. To get the most out of the strip we need a suitable RGB controller. On the other hand, it requires a power supply to operate.
Advantages of the 5m 12V DC SMD Silicone FLEX LED Strip 60LED/m 12mm Wide Cut at Every 5cm IP68
The 5m 12V DC SMD Silicone FLEX LED Strip 60LED/m 12mm Wide Cut at Every 5cm IP68 is very versatile and allows for a wide variety of applications, such as accent lighting, decorative lighting or wayfinding. In addition, its extra flat design achieves an ideal effect lighting for all types of projects with minimal visual impact. The strip is supplied with a 3M adhesive strip for easy installation.
Thanks to the wide range of colours offered, this LED strip is ideal for creating personalised atmospheres and bringing any space to life. It can be used on facades, pergolas, corridors, showcases, shelves, etc.
* LED strips should never be switched on when they are coiled up, as this could cause overheating and burn out the LEDs.
*For correct operation and to avoid incidents, the connections must be protected with an insulating element against humidity and water.
*The customer’s visual perception of sizes, colors, or textures may be affected by factors such as lighting, screen calibration, or the device used. For this reason, the images are merely illustrative and may not fully reflect the product’s actual characteristics. Please note that some of the ambient photographs shown on the website correspond to real environments, while others may have been generated or edited using artificial intelligence. In no case do they constitute an exact representation of the product or intend to mislead. To learn about the product’s real characteristics, please refer to the technical sheet and product description.