
Voltage Range
12V DC
Cut Points
5 cm
LED Strip Installation
5 m
Type Of Dimming
Controller
IP Rating
IP65
Battery Operated
No
Dimensions
3 mm x 8 mm x 5 m
Width
8 mm
Height
3 mm
Luminous Efficiency
80 lm/W
Fitting Material
PCB
Colour Rendering Index
80
Ref. Ledkia: 107556
Colour Temperature Extra Warm White 2200K
Before £10.89
£5.49
VAT includedIn Stock, delivery in 16-21 days
Not Included Controller
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentDimensions
Downloads
107556_219249_Datasheet_en_GB
DoC_107556_219249
Certificates and Stamps
Technical Specifications
LED Features
Electrical Features
Mechanical Features
Materials and Finishes
Product Information
Driver Information
The 12V DC SMD2835 LED Strip 60LED/m 5m IP65 Width 8mm Cut 5cm is a very popular option if you want decorative lighting with very low consumption. Its flexible design adapts to any location, adding a touch of colour.
This strip is 5 metres long and integrates 300 highly efficient SMD2835 technology LEDs that consume only 5 watts per metre. The bright, colourful light it emits is distributed at a 120º angle. It requires a power supply to operate.
The electronics of the LED Strip are covered with epoxy resin. It is perfectly protected against impacts and moisture, giving it an IP65 protection rating that makes this type of LED lighting perfect not only for outdoor spaces, even underwater.
This LED strip allows cuts every 5 cm, meaning you can fully maximise and adapt the LED strip to the desired space.
Thanks to its ultra-flat design, this type of LED lighting achieves an ideal effect lighting for all kinds of projects with minimal visual impact. In addition, the strip includes a 3M adhesive backing that greatly simplifies its installation on almost any surface.
The versatility of the 12V DC SMD2835 LED Strip 60LED/m 5m IP65 Width 8mm Cut 5cm allows a wide variety of applications as accent, decorative or wayfinding lighting. It is widely used in spaces such as façades, pergolas, corridors, display cabinets, shelves, etc.
* For correct operation and to avoid incidents, connections must be protected with an element that insulates against moisture and water.
* LED strips should never be switched on while rolled up; this could cause overheating and burn the LEDs.
*If you are going to install more than 5 continuous metres of this LED strip, it is necessary to cut the jack connector and make a direct connection
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.