
Voltage Range
220-240V AC
Cut Points
100 cm
LED Strip Installation
50 m
Type Of Dimming
TRIAC
IP Rating
IP65
Battery Operated
No
Dimensions
16 mm x 8 mm x 50 m
Width
8 mm
Height
16 mm
Fitting Material
PVC, Silicone
Dimmable
Yes
Ref. Ledkia: 122151
Light Colour Pink
Before £190.99
£132.99
VAT includedIn Stock, delivery in 16-21 days
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentDimensions
Downloads
Technical Data Sheet PDF
manual_tiras_led_6_idiomas
DoC_122151_255321
Certificates and Stamps
Technical Specifications
Electrical Features
Mechanical Features
Product Information
LED Features
Materials and Finishes
Driver Information
The 50m 220V Dimmable SFLEX8 Neon LED Strip Cut at Every 100cm IP65 is a lighting element with great ornamental value as it perfectly reproduces the visual effect of old neon signs.
This type of hose incorporates a covering with an opal finish that filters the light and reminisces the appearance of old neon signs. Its installation is extremely simple and does not require any special tools. Thanks to high-quality materials such as silicone, this strip has great flexibility that allows it to adapt to all kinds of places such as corners, nooks, logos or signs, although right angles or acute angles cannot be made.
This neon coil allows cutting every 100 cm, indicated on the strip itself, making its complete adaptation to the space possible. It should never be cut outside the marked cutting line, otherwise the segment will be completely unusable.
The 50m 220V Dimmable SFLEX8 Neon LED Strip Cut at Every 100cm IP65 brings a breath of fresh air to the possibilities of decoration with light. In addition, its weather resistance makes it a perfect product for all types of indoor or outdoor spaces. Get it in a wide variety of colours at our online lighting store effectLED.
* Compatible with all accessories from the S-FLEX8 range.
* For proper functioning and to prevent incidents, connections must be protected with some moisture and water-resistant insulating element.
* Neon strips should never be turned on when coiled up, as this could cause overheating and burn the LEDs.
* It is recommended not to power more than 50m continuously with one controller.
* Neon strips should be placed in ventilated areas without direct exposure to sunlight and should not exceed 40ºC for proper operation.
*The customer’s visual perception of sizes, colors, or textures may be affected by factors such as lighting, screen calibration, or the device used. For this reason, the images are merely illustrative and may not fully reflect the product’s actual characteristics. Please note that some of the ambient photographs shown on the website correspond to real environments, while others may have been generated or edited using artificial intelligence. In no case do they constitute an exact representation of the product or intend to mislead. To learn about the product’s real characteristics, please refer to the technical sheet and product description.