Colour Temperature Cool White 4000K
Colour Black
In Stock, delivery in 15-20 days
Buy now, pay later
Credit paymentDimensions
- Dimensions83 mm x 46 mm x 83 mm
Downloads
PDF Datasheet 175024_355079 EN
DoC_175024_355079
Certificates and Stamps
Technical Specifications
Electrical Features
- Electrical Insulation ClassI
- Frequency50-60 Hz
- Light SourceSMD
- No. Of Lights1
- Voltage Range220-240V ACVoltage level required for the product to function correctly.
- Wattage3 W
Mechanical Features
- InstallationRecessed, Wall
- IP RatingIP44The IP protection indicates the level of resistance of a product to dust and water. The higher the number, the more protected it is.
- LocationOutdoor, Indoor
- Working Temperature-20 °C~+60 °CInternal temperature range in which the product can operate efficiently and safely. It is important to ensure its reliability under different usage conditions.
LED Features
- Beam Angle150ºMeasures in degrees how light spreads from the source. A wide angle covers more area, while a narrow one is ideal for highlighting details.
- Colour Temperature4000KDefines the light tone, from warm white to cool white, measured in Kelvin (K).
- Hours40.000 hoursEstimated lifespan of the product before it loses performance. Based on optimal, non-continuous use, and measured in hours of operation under controlled conditions.
- Light ColourCool White
- Lumen23.9 lm
- Luminous Efficiency8 lm/WRatio between light output (lumens) and energy consumed (watts). A high value indicates better efficiency, ideal for saving energy without compromising lighting.
- Number of LEDs15
Product Information
- CertificatesCE, RoHS, UKCA
- Guarantee3 years
Materials and Finishes
- ColourBlack
- Fitting MaterialAluminium
Driver Information
- WifiNo
Description
Compact round wall bollard for recessed installation that resolves the light as a discreet opening on the surface. Its aluminium body integrates the accent lighting function with a contained output suited to guiding and marking.
General information about Segre 3W Round Outdoor Recessed LED Wall Light
Segre 3W Round Outdoor Recessed LED Wall Light presents a minimal circular front that sits flush with the wall to deliver a subtle marker effect. Built in aluminium, this piece focuses the light through a recessed aperture, keeping the façade visually calm while signalling the plane. With a single light point and SMD source, it prioritises guidance over flux, aligning with projects where the lighting element should recede and the surface remain legible. As an outdoor-ready solution, it supports accent-driven compositions in passages and thresholds where recessed fixtures, wall mounting and bollard logic need to act with precision.
Design and visual presence
The circular geometry reads as a small, clean disc that merges with the wall, reducing noise and allowing the opening to define the luminous gesture. Aluminium construction supports a crisp edge and durable presence without overtaking the architecture. The recessed build creates depth, so the emission emerges contained within the cavity, enhancing visual order in the plane. This recessed wall format offers a compact footprint and a measured projection suitable for corridors and exterior routes. The overall language privileges integration, controlled light and a marker role, delivering a discreet visual cue that complements the materiality around it.
Use and applications
Designed for projects where guiding movement and defining limits are key, this solution supports visual navigation along routes, steps or perimeters without competing with the main composition. The outdoor classification and wall-recessed installation align with façades or transitional areas, and its contained output reinforces a calm reading of surfaces. In interiors, it can support wayfinding along passages when a compact marker is preferred. The installation confirms a built-in approach, while the single light point with SMD source provides a consistent signal suited to bollard applications in decorative or architectural contexts.
Key benefits
- Recessed wall integration that keeps the surface clean and prioritises the reading of the plane.
- Compact circular geometry for discreet presence and easy alignment in series or rhythms.
- Guidance-focused output to support wayfinding and visual cues in passages and transitions.
- Aluminium construction that offers a defined edge and stable visual quality in the set.
- Single light point with SMD source coherent with a controlled marker function.
Highlighted specifications
Material: Aluminium; Wattage: 3 W; Light source: SMD; Installation: Recessed wall.
Installation and maintenance
Installation is resolved through a recessed system on wall, following the indicated mounting method and ensuring the housing accommodates the body and aperture flush to the surface. Electrical connection should respect the specified supply parameters and the built-in configuration of the unit. For maintenance, periodic external cleaning of the visible trim and aperture is recommended, avoiding abrasive products and preserving the integration with the surface. Installation should be carried out by qualified personnel, respecting outdoor conditions where applicable and the recessed build of this wall marker. Disconnect the power supply before any intervention.
Frequently asked questions
- What type of installation does it use? — Recessed mounting on wall to leave the front flush.
- Is it suitable for outdoor applications? — The configuration and classification allow use in exterior projects.
- Does it include the light source? — Incorporates an SMD source integrated into the fitting.
- How many light points does it have? — One light point to deliver a controlled marker effect.
- What are the overall dimensions? — 83 mm x 46 mm x 83 mm, for a compact footprint on the surface.
Specialized decorative lighting distribution in United Kingdom. If you are looking to buy Segre 3W Round Outdoor Recessed LED Wall Light with a refined decorative approach, it is designed to integrate naturally into different projects. Check price and availability here.
*The customer’s visual perception of sizes, colors, or textures may be affected by factors such as lighting, screen calibration, or the device used. For this reason, the images are merely illustrative and may not fully reflect the product’s actual characteristics. Please note that some of the ambient photographs shown on the website correspond to real environments, while others may have been generated or edited using artificial intelligence. In no case do they constitute an exact representation of the product or intend to mislead. To learn about the product’s real characteristics, please refer to the technical sheet and product description.