
Voltage Range
220-240V AC
Cut Out Dimensions
65 mm x 65 mm
IP Rating
IP20
Dimensions
80 mm x 80 mm x 47 mm
Width
80 mm
Height
80 mm
Fitting Material
PCB
Ref. Ledkia: 497
£8.89
VAT includedIn Stock, delivery in 16-21 days
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentDimensions
Downloads
Technical Data Sheet PDF
DoC_497_0
Certificates and Stamps
Technical Specifications
Mechanical Features
Electrical Features
Product Information
Materials and Finishes
Driver Information
This wall mounted PIR Motion Detector has a 160° coverage angle and a 9 metre detection radius when at a height of 1 to 2 metres. Capable of detecting infrared emissions from any heat source without emitting any radiation.
The detector activates its output circuit when a heat source moves in front of the switch (at a rate of 0.6 to 1.5 m/s) and deactivates when the heat is no longer detected and some time has passed. Both the timer and light sensitivity can be adjusted.
Detection Angle: 160°
Detection Distance: 9 metre radius approx.
Minimum ON time: 10 seconds ±3 seconds.
Maximum ON time: 7 minutes ±1 minute.
Installation Height: 1 to 2 metres.
Detection Speed: 0.6-1.5 m/s.
Charges: 300W LED and 1200W Incandescent.
*The customer’s visual perception of sizes, colors, or textures may be affected by factors such as lighting, screen calibration, or the device used. For this reason, the images are merely illustrative and may not fully reflect the product’s actual characteristics. Please note that some of the ambient photographs shown on the website correspond to real environments, while others may have been generated or edited using artificial intelligence. In no case do they constitute an exact representation of the product or intend to mislead. To learn about the product’s real characteristics, please refer to the technical sheet and product description.