55W Solar LED Luminaire with Motion and Twilight Sensor

The 55W Solar LED Luminaire with Motion and Twilight Sensor is perfect for all types of locations, especially those where the mains power supply is not available. This is because this Solar Luminaire does not need to be connected to the electricity grid.

Characteristics of the 55W Solar LED Luminaire with Motion & Twilight Sensor

Its operation is very simple, this luminaire detects the movement and the incident sunlight, that's why when the twilight sensor detects that it is night it will put the luminaire in operation. Two modes can be selected:

Motion sensor constant light mode, when it detects movement it turns on the luminaire at 100% of its performance, if after 20 seconds it does not detect any person it will reduce its brightness to 30%, this way it saves energy at night. When the twilight sensor detects that it is daytime, it will completely turn off the luminaire and charge the internal battery. The lighting is constant at 30% of its maximum efficiency.

Motion Sensor Mode, this Solar luminaire incorporates a large capacity battery, which would allow us, assuming that adverse weather conditions do not allow the battery to be charged by the incidence of sunlight for several days, to be on for 3 to 4 days at night for an average of 10-12 hours (battery autonomy will vary according to weather conditions, battery charge and discharge cycles, humidity, working ambient temperature, etc)

This is an innovative and high-tech product. Its light source is based on 25 powerful SMD2835 high-efficiency LEDs that offer very high luminosity for low consumption. The light beam is asymmetric to facilitate a better use of the luminous flux.

As it is a completely self-sufficient and sustainable luminaire, it provides the maximum savings and reduction of electrical consumption possible. The 55W Solar LED Luminaire with Motion and Twilight Sensor is made of high quality and robust PC. It has an IP65 protection factor against dust and water. In addition, this luminaire has all the components for its operation and installation integrated (LED board, Solar panel, LED module, motion and proximity sensor or detection, twilight sensor, on/off timer, etc).

Take a step further on the road to energy efficiency with the  55W Solar LED Luminaire with Motion and Twilight Sensor and join the clean energy revolution.