Free shipping from £ ( )
12/24V RGBW LED Tactile Controller + RF Remote Control Dimmer
Price
Before £
£
Price not available
Ref: 732 / CTL-RGBW-RF
This RGBW LED tactile controller with an RF remote control (Radio Frequency) has a modern and diaphanous design and 2.4 Ghz high frequency remote control technology, strong interference resistance and a 30 metre range. The colour changing functions and brightness settings are simple and practical.
Configuration of the RGBW 12/24V DC LED Strip Touch Dimmer Controller with RF Controller
The Touch Dimmer Controller is designed for this RGBW receiver, but it can also be linked to a countless number of receivers, but a single receiver can have up to 4 Controllers linked to it.
The procedure for linking one or more receivers to a single controller is as follows:
1. For a new kit, the Touch Controller Controller can only work when the Receiver is programmed. To do this, the following steps must be followed:
a. Connect the Power Supply, the LED Receiver and the LED Lighting.
b. Switch off the power supply, hold down the M+ key for 3 seconds and switch it back on again until you see the light on. The light will blink 2 times slowly when the controller and remote are set up.
*Note: In case the LED does not flash 2 times slowly, the process must be repeated.
Dimensions: Receiver (85x45x22 mm); Remote Control (120x53x20 mm).
*It supports a maximum charge of 120W and 6A per channel.
Maximum Power: | 120 W |
Voltage: | 12V DC, 24V DC |
Intensity Level: | 6 A |
Dimmable: | Remote Control |
Light Colour: | RGBW |
Use: | Indoor |
IP Protection: | IP20 |
Material: | ABS |
Size: | 85x45x22 mm |
Height: | 85 mm |
Width: | 45 mm |
Length: | 22 mm |
Detection Distance: | 30 m |
Includes: | RF Remote Control |
Warranty: | 3 Years |
Certifications: | UKCA, CE & RoHS |