Range Advanced

Voltage Range 12V DC, 24V DC
Max Wattage 120 W
Type Of Dimming Remote Control
IP Rating IP20

1 / 4

Voltage Range
12V DC, 24V DC
Max Wattage
120 W
Type Of Dimming
Remote Control
IP Rating
IP20
Dimensions
85 mm x 45 mm x 22 mm
Width
45 mm
Height
85 mm
Fitting Material
ABS Plastic
Dimmable
Yes
Current Intensity
6 A

£18.49

VAT included

In Stock, delivery in 24/48h

Includes RF remote control

Are you a lighting professional or a company?

Great discounts off PVP
Extended Warranty
Exclusive Services

Dimensions

Depth22 mm
Width45 mm
Height85 mm

Downloads

Technical Data Sheet PDF
Instruction Manual
DoC_732_0

Certificates and Stamps

Technical Specifications

Electrical Features
- Current Intensity6 A
- Max Wattage120 W
- Type Of DimmingRemote Control
- Voltage level required for the product to function correctly.
  Voltage Range12V DC, 24V DC
Materials and Finishes
- ColourWhite
- Fitting MaterialABS Plastic
- IncludesRF remote control
Mechanical Features
- Temperature range in which the product can operate optimally, ensuring its performance without overheating or damage.
  Ambient Working Temperature-20 °C~+50 °C
- The IP protection indicates the level of resistance of a product to dust and water. The higher the number, the more protected it is.
  IP RatingIP20
- LocationIndoor
Product Information
- CertificatesCE, RoHS, UKCA
- Guarantee3 years

Description

This RGBW LED tactile controller with an RF remote control (Radio Frequency) has a modern and diaphanous design and 2.4 Ghz high frequency remote control technology, strong interference resistance and a 30 metre range. The colour changing functions and brightness settings are simple and practical.

Configuration of the RGBW 12/24V DC LED Strip Touch Dimmer Controller with RF Controller

The Touch Dimmer Controller is designed for this RGBW receiver, but it can also be linked to a countless number of receivers, but a single receiver can have up to 4 Controllers linked to it.

The procedure for linking one or more receivers to a single controller is as follows:

1. For a new kit, the Touch Controller Controller can only work when the Receiver is programmed. To do this, the following steps must be followed:

a. Connect the Power Supply, the LED Receiver and the LED Lighting.

b. Switch off the power supply, hold down the M+ key for 3 seconds and switch it back on again until you see the light on. The light will blink 2 times slowly when the controller and remote are set up.

*Note: In case the LED does not flash 2 times slowly, the process must be repeated.

Dimensions: Receiver (85x45x22 mm); Remote Control (120x53x20 mm).

*It supports a maximum charge of 120W and 6A per channel.

*The customer’s visual perception of sizes, colors, or textures may be affected by factors such as lighting, screen calibration, or the device used. For this reason, the images are merely illustrative and may not fully reflect the product’s actual characteristics. Please note that some of the ambient photographs shown on the website correspond to real environments, while others may have been generated or edited using artificial intelligence. In no case do they constitute an exact representation of the product or intend to mislead. To learn about the product’s real characteristics, please refer to the technical sheet and product description.

Dimming Controller for 12/24V DC RGBW LED Strip with RF Remote

Description