Colour Black
Colour Temperature CCT 2700K - 3300K - 4000K
In Stock, delivery in 15-20 days
Buy now, pay later
Credit paymentDimensions
- Dimensions110 mm x Ø108 mm
- Cable Length300 mm
Downloads
PDF Datasheet 174817_354842 EN
DoC_174817_354842
Certificates and Stamps
Technical Specifications
Electrical Features
- Electrical Insulation ClassI
- Frequency50-60 Hz
- Light SourceSMD
- No. Of Lights1
- Voltage Range220-240V ACVoltage level required for the product to function correctly.
- Wattage5 W
Mechanical Features
- InstallationWall-top mounted, Floor, Surface
- IP RatingIP65The IP protection indicates the level of resistance of a product to dust and water. The higher the number, the more protected it is.
- LocationOutdoor, Indoor
- Working Temperature-20 °C~+60 °CInternal temperature range in which the product can operate efficiently and safely. It is important to ensure its reliability under different usage conditions.
LED Features
- Colour Temperature2700K - 3300K - 4000KDefines the light tone, from warm white to cool white, measured in Kelvin (K).
- Hours30.000 hoursEstimated lifespan of the product before it loses performance. Based on optimal, non-continuous use, and measured in hours of operation under controlled conditions.
- Light ColourCCT
- Luminous Efficiency646 lm/WRatio between light output (lumens) and energy consumed (watts). A high value indicates better efficiency, ideal for saving energy without compromising lighting.
- Number of LEDs50
Product Information
- CertificatesCE
- Guarantee3 years
Materials and Finishes
- ColourBlack
- Fitting MaterialAluminium, PC
Driver Information
- WifiNo
Description
A compact bollard for accent and marker lighting, the Obis Outdoor 5W Aluminium Fence Post Light presents a clean cylindrical volume in aluminium with a neat top diffuser. Its surface installation supports outdoor guidance with IP65 protection.
General information about Obis Outdoor 5W Aluminium Fence Post Light 11cm
Obis Outdoor 5W Aluminium Fence Post Light 11cm resolves wayfinding and subtle perimeter accents through a contained cylinder that reads clearly on posts and low boundaries. The body in aluminium works with a discreet PC diffuser to control glare and define the luminous footprint. With 5 W SMD light source and a single emission point, this piece supports clean visual order across outdoor edges and entrances. The 11 cm height keeps the presence minimal while maintaining readability along the route, fitting naturally into decorative and architectural schemes where light acts as a guide more than a protagonist.
Design and visual presence
The form is compact and geometric: a low cylinder that sits flush on the surface to draw a quiet line of guidance. Its surface-mounted stance and short height reinforce a contained visual profile that integrates with fencing, caps and plinths without visual noise. The aluminium structure conveys a solid, precise outline, while the PC diffuser softens the luminous aperture to avoid harsh contrast on the eye. Read as a series, it rhythms the perimeter; used singly, it marks a transition or corner with the same restraint.
Use and applications
Designed for decorative and architectural projects that require visual guidance on outdoor routes, perimeters and access points. Its role is to accompany movement and clarify limits in outdoor contexts, integrating as a surface installation on fence posts, caps or low bases. The IP65 construction supports exposed placements where rain or dust are present, while the single light point keeps the message clear and legible without excess brightness.
Key benefits
- Integration in surface thanks to its compact cylinder that sits cleanly on posts and caps.
- Clear visual guidance with one light point that marks routes and boundaries con claridad.
- Consistent reading of the perimeter when installed en serie, supporting wayfinding without visual clutter.
- Material coherence combining aluminium body and PC diffuser for a controlled luminous aperture.
Highlighted specifications
Material: Aluminium and PC; Wattage: 5 W; IP rating: IP65; Light source: SMD.
Installation and maintenance
Installation is resolved as a surface-mounted piece on the indicated support, following the fixing method suitable for the substrate and the product base. Where specified, the 300 mm cable offers room for connection management within the post or cap. Routine care focuses on periodic cleaning of the PC diffuser and a visual check of the surface installation fixings. Disconnect the power supply before any intervention.
Frequently asked questions
- What type of installation does it require? — Surface-mounted on a suitable post, cap or base.
- Is it intended for outdoor use? — The IP65 construction supports exterior applications exposed to rain and dust.
- Does it include an integrated light source? — It works with SMD technology integrated in the fitting.
- What is the general format? — A compact cylinder, approximately 110 mm high and Ø108 mm.
- Is it suitable for marking routes or perimeters? — Its single light point and compact presence support marker lighting along boundaries and access points.
Specialized decorative lighting distribution in United Kingdom. If you are looking to buy Obis Outdoor 5W Aluminium Fence Post Light 11cm with a refined decorative approach, it is designed to integrate naturally into different projects. Check price and availability here.
*The customer’s visual perception of sizes, colors, or textures may be affected by factors such as lighting, screen calibration, or the device used. For this reason, the images are merely illustrative and may not fully reflect the product’s actual characteristics. Please note that some of the ambient photographs shown on the website correspond to real environments, while others may have been generated or edited using artificial intelligence. In no case do they constitute an exact representation of the product or intend to mislead. To learn about the product’s real characteristics, please refer to the technical sheet and product description.