Inti
Inti 1.5W Stainless Steel Solar LED Bollard with PIR Motion Sensor 50cm
£32.79
£43.99
Ref: 6186
(1)5 out of 5 stars
Colour Temperature Daylight 5000K
In Stock, delivery in 24/48h
Buy before 2:30 pm we’ll ship it today.
Buy now, pay later
Credit paymentDimensions
- Height500 mm
- Depth98 mm
- Width98 mm
Downloads
6186_205294_Datasheet_en_GB
DoC_6186_205294
Certificates and Stamps
Technical Specifications
LED Features
- Colour Temperature5000KDefines the light tone, from warm white to cool white, measured in Kelvin (K).
- Light ColourDaylight
- Lumen150 lm
- Luminous Efficiency100 lm/WRatio between light output (lumens) and energy consumed (watts). A high value indicates better efficiency, ideal for saving energy without compromising lighting.
- Number of LEDs8
Driver Information
- Replaceable DriverYes
- WifiNo
Electrical Features
- Light SourceSMD2835
- No. Of Lights1
- Replaceable Light SourceYes
- Voltage Range12V DCVoltage level required for the product to function correctly.
- Wattage1.5 W
Mechanical Features
- Detection Range120 °Defines the sensitivity area of a sensor in degrees. A wider angle will detect motion over a larger area.
- InstallationFloor, Surface, Vertical
- IP RatingIP44The IP protection indicates the level of resistance of a product to dust and water. The higher the number, the more protected it is.
- LocationOutdoor
- SensorPIR
- Sensor TypePIR
Battery Information
- Batteries IncludedYes
- Battery Capacity500 mAh
- Battery Voltage3.2 V
- Charging Time6 h~8 hTime required to fully recharge the product's battery, depending on the battery capacity and the charging source.
- Number Of Batteries1
- Type Of BatteryLiFePO4
- Type Of ChargeSolar
Materials and Finishes
- ColourSilver
- Fitting MaterialStainless Steel
Product Information
- CertificatesCE, RoHS, UKCA
- Guarantee2 years
- RangeInti
Description
The Inti 1.5W LED Solar Outdoor Bollard, Surface-Mounted, 50 cm, Stainless Steel with Motion Sensor is a self-sufficient and functional solution for outdoor lighting projects seeking energy efficiency, contemporary aesthetics, and ease of installation. Designed for gardens, pathways, or landscaped environments, this bollard combines solar power, motion sensor, and LED light in an elegant freestanding format that does not require connection to the mains.
Autonomous Technology with Sensor and Integrated Battery
Equipped with a solar panel and an internal rechargeable battery, this bollard enables fully independent operation. During the day, the light sensor detects sunlight and activates charging of the integrated battery. At dusk, the system enters beacon mode with a soft light and, upon detecting movement, activates a bright illumination for 45 seconds. If no presence is detected, it automatically returns to low-consumption mode. This smart system allows up to 140 night-time activations per full charge, ensuring functionality without ongoing maintenance or electricity consumption.
Minimalist Design and Use in Outdoor Spaces
With a height of 50 cm and a stainless steel finish, this bollard integrates perfectly into garden areas, pedestrian pathways, residential entrances, or shared spaces in hotels and resorts. Its discreet, modern design enhances the surroundings without disrupting the landscape architecture. It is especially useful in areas where laying electrical cabling is not feasible, as it is installed directly on the surface and operates autonomously.
Sustainable Lighting with No Need for Cabling
The solar energy used by this bollard not only reduces energy consumption to zero but also minimises environmental impact, enabling efficient lighting projects without construction work or a grid connection. Thanks to its motion detector, it optimises night-time autonomy and provides added security in exterior walkways or access areas. Ideal for installers seeking a quick, no-works solution with a professional result.
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.