Free shipping from £ ( )
Remote Control for the 1-10V and Triac RF LED Dimmer Switch
Price
Before £
£
Price not available
Ref: 63727 / MND-RF-TRC
The Remote control for the 1-10V and Triac RF LED Dimmer Switch uses wireless technology in the 2.4 GHz band, specially developed for the control of Triac and 1-10V RF dimmers without the need to install wiring.
This dimmer switch can control several dimmers as long as they use the same RF technology.
Characteristics of the Remote control for the 1-10V and Triac RF LED Dimmer Switch
The Remote control for the 1-10V LED Dimmer Switch and Triac RF can be mounted anywhere, screwed to the wall or in the same universal box.
The ON/OFF button can be used to switch the luminaire on and off and the other buttons on the control unit can be used to adjust the brightness and even two scenes.
It incorporates an auto-transmission system allowing the signal to be transmitted simultaneously between dimmers at a maximum distance of 30 metres from each other, and the furthest controller can be installed at a distance of up to 100 metres from the RF Controller for Single Colour LED Dimmers.
Each controller can control up to 20 controllers at the same time, as long as each controller is synchronised one to one with each controller and they work within the allowed range. Each controller can be controlled by up to 10 RF controllers.
Don't miss the opportunity, and take advantage to enjoy the best quality lighting, accompanied by elegance and style.
* It is essential to purchase the RF 1-10V Universal LED Dimmer/Push button, Triac RF Universal LED Controller or Triac RF Universal LED Dimmer for DIN rail.
Maximum Tension: | 3V DC |
Use: | Indoor |
IP Protection: | IP20 |
Material: | ABS |
Installation: | Surface |
Size: | 140x36x11 mm |
Width: | 11 mm |
Detection Distance: | 30 m |
Working Temperature: | -30°C ~ +55°C |
Battery: | CR2032 |
Number of Batteries: | 1 |
Doesn't include: | Batteries |
Warranty: | 3 Years |
Certifications: | UKCA, CE & RoHS |