Free shipping from £ ()
-
Business hours
Mon - Thu 8:30am-5:00pm | Fri 8:30am-4:00pm
Call us at
We can call you forfree
Your phone number
Search for your product here
90 cm (3ft) 14W Aluminium T8 LED Tube with PIR Motion Detector Radar (Total shutdown) 100lm/W
Price
Before £
£
Price not available
FREE
90 cm (3ft) 14W Aluminium T8 LED Tube with PIR Motion Detector Radar (Total shutdown) 100lm/W
Ref: 925 / SJ-DG12T8-D14W-002-AT
Similar products
Description 90 cm (3ft) 14W Aluminium T8 LED Tube with PIR Motion Detector Radar (Total shutdown) 100lm/W
T8 LED tube with presence detection via infrared, with a consumption of 14W, a brightness of 1,400 lumens. It comes presented with a translucent closure.
The detector captures the invisible infrared emissions from people and other heat sources without emitting any type of radiation, activating when a heat source moves in front of the switch and turning off once it stops capturing the movement of the heat source, after approximately 30 to 40 seconds.
For correct operation of the sensor, its installation in open luminaires is recommended.
*Does not include Led Starter .
Characteristics 90 cm (3ft) 14W Aluminium T8 LED Tube with PIR Motion Detector Radar (Total shutdown) 100lm/W
| Power: | 14 W |
| Power Factor: | 0.80 |
| Voltage: | 220-240V AC |
| Multi-Voltage: | 85-265V AC |
| Frequency: | 50-60 Hz |
| Screw: | T8 |
| Light Source: | SMD3014 |
| Light Colour: | Cool White |
| Colour Temp: | 6000K - 6500K |
| CRI: | 80 |
| Lumens: | 1400 lm |
| Energy Efficiency 2021 (UE-1369/2017): | A+ |
| Energy Efficiency 2023 (UE-2019/2015): | F |
| Beam Angle: | 160º |
| Lens Type: | Frost |
| Use: | Indoor |
| IP Protection: | IP44 |
| Special: | Detector |
| Material: | Aluminium,PC |
| Size: | 900xØ26 mm |
| Length: | 900 mm |
| Diameter: | Ø26 mm |
| Detector: | PIR |
| Detection Distance: | 6-8m |
| Detection Angle: | 180º |
| Working Temperature: | -20ºC ~ +45ºC |
| Life Span: | 50,000 Hours |
| Warranty: | 3 Years |
| Certifications: | CE & RoHS,UKCA |
Accessories
Do not press BACK or REFRESH while processing...