Smart WiFi TRIAC Dimmer Switch for Table/Floor Lamps

The WiFi Dimmer Switch for Table/Floor Lamps is the ideal solution for replacing the dimmers of table or floor lamps in your home with a touch of design. Specially designed for dimmable LEDs, incandescent lamps and halogen lamps. Available in two colours, they are highly resistant and durable. It works both manually and via WiFi through the TUYA app.

Characteristics of the Smart WiFi TRIAC Dimmer Switch for Table/Floor Lamps

he WiFi Switch Dimmer for Table/Floor Lamps allows you to control the intensity of all those products with LED technology up to 50W that accept dimming from 0 to 100% and incandescent and halogen technology products up to 100W.

With this LED Dimmer we have the possibility of creating different atmospheres in the same room adapting the luminosity according to the needs, all this with a single turn of the controller. They have the standard size, so they can be a replacement for any classic table or floor lamp switch.

 Designed to be connected to both flat and round cables. Its operation is very simple, pressing the button you can turn on and off the luminaire connected to this and turning this regulates the light intensity of this. It does not generate noise or cause flickering problems.

Operation of the Smart WiFi TRIAC Dimmer Switch for Table/Floor Lamps

The device is controlled by the TUYA application. The APP is available for iOS and Android operating systems. It can be downloaded from the App Store and Google Play respectively.

- Download the Tuya Smart app from the App Store or Google Play Store.
- After installation, press and hold the reset button for more than 5 seconds until the red light starts flashing rapidly (If the indicator light flashes slowly, press the reset button again until the flashing is rapid).
- Open the Tuya application and press the "+" symbol in the top right corner of the screen.
- Choose "lighting" and the "lighting (wifi)" tab and follow the instructions.
- It is necessary to enter a wifi password before pairing is initiated.
- The indicator light will stop flashing when the pairing is successful and the operation screen will be shown on the display.
- You will be able to control your lights remotely.