This product is discontinued
Below you can find the substitute product or some equivalents.
If you have any queries, please call us on telephone 020 3739 1978.

Wattage
7 W
Voltage Range
220-240V AC
Lumen
700 lm
Cut Out Dimensions
Ø55 mm
Diameter
60 mm
Type Of Dimming
TRIAC
Power Factor
0.9
IP Rating
IP44
Battery Operated
No
Dimensions
80 mm x Ø60 mm
Height
80 mm
IK Protection
IK05
Ref. Ledkia: 105551
£13.49
Jelly 7W MINI LED Downlight Ø 50 mm Cut Out
In Stock, delivery in 15-20 days
Dimensions
Downloads
Technical Data Sheet PDF
DoC_105551_215138
Certificates and Stamps
Technical Specifications
Materials and Finishes
Driver Information
Electrical Features
Mechanical Features
LED Features
Product Information
The 7W Round Mini Spotlight UGR11 with Ø55 mm Cut Out is a very versatile option when lighting the space in a practical, simple and effective way. With this choice you will be opting for a significant saving in electricity consumption.
Features of the 7W Round Mini Spotlight UGR11 with Ø55 mm Cut Out
This downlight incorporates a LED chip with a power of 7W and a luminosity of 700lm. The light emitted is spread at a concentrated angle of 35º. It has a UGR of less than 11 and a colour rendering index (CRI) of 80.
It is made of aluminium, a material that is highly resistant to external agents and with very good finishes. Its installation is very simple, it only requires a Ø55 mm hole in the surface where it is to be installed.
With the characteristics of this LED lighting product you will have in your hands a product with good performance. Ideal for use in interior spaces where it is not necessary to use a large amount of light. It is mainly used in transit areas such as hallways, corridors or stairways.
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.