Conical Low UGR Downlight Bezel Ø70mm Cut Out for GU10 / GU5.3 LED Bulbs

This conical downlight bezel is a mounting accessory designed for recessed installations, providing a neat finish with a Ø75 mm cut out and an external Ø90 mm trim. It works with GU10 / GU5.3 lamp holders, enabling flexible project specification.

General information about Conical Low UGR Downlight Bezel Ø70mm Cut Out for GU10 / GU5.3 LED Bulbs

Engineered as a finishing ring for recessed downlights, this bezel integrates cleanly into ceilings and supports a professional look across commercial and residential projects. Its conical geometry helps position the light source deeper within the aperture, contributing to visual comfort in the illuminated space without claiming photometric performance. The piece measures 30 mm in height with a Ø90 mm visible diameter, fitting a Ø75 mm ceiling cut out for straightforward placement in standard openings.

Manufactured in PC, it offers a lightweight and practical solution for mounting and fixing downlight lamp holders. The accessory is intended for indoor applications and is supplied without bulbs, allowing the installer to select GU10 or GU5.3 light sources as required by the project. As an accessory for luminaires, it focuses on finish quality and integration with typical recessed systems.

Use and applications

This bezel resolves the aesthetic finish and seating of the lamp holder in recessed ceilings, aligning the trim with the plasterboard surface and helping to control direct sight of the source through its conical form. It fits projects where neat installation and consistent mounting dimensions are needed, particularly when the ceiling opening is Ø75 mm and the visible trim should be Ø90 mm for a balanced appearance.

Being intended for indoor use and made of PC, it suits technical installations where a lightweight accessory is preferred. There are no bulbs included, so it requires a compatible GU10 or GU5.3 lamp holder and lamp to complete the assembly. Use within recessed systems that accept the specified cut out, following the luminaire’s own constraints and the ceiling substrate limits.

• Recessed refurbishment — justified by the Ø75 mm cut out that matches existing openings.
• Projects needing visual comfort — supported by the conical bezel that recesses the source within the trim.
• Standardised mounting — enabled by the Ø90 mm outer diameter for consistent visible finish.

Key benefits

• Clean ceiling finish by hiding edges thanks to the conical bezel design.
• Streamlined installation through the defined cut out and trim sizes.
• Flexible specification for GU10 or GU5.3 holders by design.
• Lightweight handling on site due to the PC construction.
• Consistent mounting alignment in recessed systems by its fixed geometry.

Highlighted specifications

Dimensions: 30 mm x Ø90 mm; Cut out: Ø75 mm; Material: PC; Location: Indoor.

Installation and maintenance

Proceed with recessed fitting according to the indicated system, ensuring the ceiling aperture is Ø75 mm for correct seating and that the visible trim rests flush at Ø90 mm. Fit the chosen GU10 or GU5.3 lamp holder in line with the holder manufacturer’s method, then insert the lamp once the assembly is secure. Check that the substrate supports the accessory and that any fixing method used is compatible with PC material to avoid damage.

Disconnect the power supply before any intervention. After installation, verify stable retention and that the lamp is properly seated within the conical aperture. For maintenance, remove the lamp following the holder’s guidance and clean the bezel with a dry, non-abrasive cloth.

Specialized lighting distribution in United Kingdom. If you are looking to buy Conical Low UGR Downlight Bezel Ø70mm Cut Out for GU10 / GU5.3 LED Bulbs with a professional warranty, it is a leading choice for durability and efficiency. Estimated shipping in 15 to 20 days (subject to stock availability). Quality certified by CE, RoHS, UKCA for professional installations and projects. Check price and availability here.

Frequently asked questions

• What ceiling opening is required? — A cut out of Ø75 mm is required for correct placement.
• Does it include the lamp or holder? — It does not include bulbs; a compatible GU10 or GU5.3 holder and lamp are needed.
• What are the overall dimensions? — The visible trim is Ø90 mm and the height is 30 mm.
• Is it suitable for outdoor use? — It is indicated for indoor applications.
• What material is the bezel made of? — The bezel is made of PC.