The 24V DC LED Strip 120LED/m 5m IP65 Width 8mm is a widely used option if you want decorative lighting with very low consumption. Its flexible design adapts to any location, adding a touch of colour.

Features of the 24V DC LED Strip 120LED/m 5m IP65 Width 8mm Cut every 5cm 

This 24V DC LED Strip 120LED/m 5m IP65 Width 8mm is 5 metres long and integrates 600 highly efficient SMD2835 LEDs that consume only 10.5W per metre. The bright, colourful light it emits is distributed at a 120º angle. It requires a power supply to operate.

This LED strip allows cutting every 5 cm, enabling maximum adaptation to the desired space.

The electronics of the LED Strip are covered with epoxy resin. It is perfectly protected against impacts and humidity, which gives it an IP65 protection rating, making this type of LED lighting perfect not only for indoor spaces but also outdoors.

Advantages of the 24V DC LED Strip 120LED/m 5m IP65 Width 8mm Cut every 5cm

Thanks to its ultra-slim design, this type of LED lighting achieves an ideal effect lighting for all kinds of projects with minimal visual impact. Likewise, the strip includes a 3M adhesive backing that greatly simplifies its installation on almost any surface.

The versatility of the 24V DC LED Strip 120LED/m 5m IP65 allows a wide range of applications as accent lighting, decorative lighting or wayfinding for passage areas. It is widely used in spaces such as façades, pergolas, corridors, display cabinets, shelving, etc.

*For proper operation and to avoid incidents, the connections must be protected with an element that insulates against moisture and water.

*LED strips should never be switched on while coiled, as this could cause overheating and burn out the LEDs.

*If you are going to install more than 5 continuous metres of this LED strip, it is necessary to cut the jack connector and make a direct connection