
Luminous Efficiency
110 lm/W
Voltage Range
24V DC
Cut Points
10 cm
LED Strip Installation
10 m
Type Of Dimming
Controller
IP Rating
IP68
Battery Operated
No
Dimensions
5 mm x 12 mm x 5 m
Width
12 mm
Height
5 mm
Fitting Material
PCB, Epoxy Resin, Silicone
Dimmable
Yes
Ref. Ledkia: 62350
4.5 out of 5 stars
Colour Temperature Cool White 4000K
Before £39.99
£23.99
VAT includedIn Stock, delivery in 24/48h
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentDimensions
Downloads
62350_122358_Datasheet_en_GB
DoC_62350_122358
Certificates and Stamps
Technical Specifications
LED Features
Electrical Features
Mechanical Features
Product Information
Materials and Finishes
Driver Information
The Submersible 24V DC 60LED/m 5m IP68 12mm Wide LED Strip is a very popular option if you want a decorative light with very low power consumption. Its flexible design adapts to any location, adding a splash of colour.
This Submersible 24V DC 60LED/m IP68 12mm Wide LED Strip is 5 metres long and integrates 300 highly efficient SMD5050 LEDs that consume just 12 watts per metre. The bright, colourful light it emits is spread over a 120º beam angle. It requires a power supply to operate.
The electronics of the LED strip are covered with epoxy resin. It is perfectly protected against impacts and moisture, which gives it an IP68 protection rating, making this type of LED lighting perfect not only for outdoor spaces, but even underwater.
This LED strip allows cutting every 10 cm, meaning the strip can be fully utilised and adapted to the desired space.
Thanks to its ultra-thin design, this type of LED lighting achieves ideal effect lighting for all types of projects with minimal visual impact. Likewise, the strip includes a 3M adhesive backing that greatly simplifies installation on almost any surface.
The versatility of the Submersible 24V DC 60LED/m 5m IP68 12mm Wide LED Strip allows for a wide range of applications such as accent lighting, decorative lighting, or wayfinding/marker lighting. It is widely used in spaces such as façades, pergolas, corridors, display cabinets, shelving, etc.
* LED strips should never be switched on while rolled up, as this could cause overheating and burn out the LEDs.
*If you are going to install more than 5 continuous metres of this LED strip, it is necessary to cut off the jack connector and make a direct connection
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.