
Voltage Range
24V DC
Cut Points
10 cm
LED Strip Installation
10 m
Type Of Dimming
Controller
IP Rating
IP65
Battery Operated
No
Dimensions
3 mm x 8 mm x 5 m
Width
8 mm
Height
3 mm
Fitting Material
PCB
Colour Rendering Index
80
Dimmable
Yes
Ref. Ledkia: 108144
Colour Temperature Cool White 6000K
Before £11.99
£5.69
VAT includedIn Stock, delivery in 15-20 days
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentDimensions
Downloads
108144_220656_Datasheet_en_GB
DoC_108144_220656
Certificates and Stamps
Technical Specifications
LED Features
Electrical Features
Mechanical Features
Product Information
Materials and Finishes
Driver Information
The 24V DC SMD2835 60LED/m 5m IP65 8mm Width 10cm Cut LED Strip is a very popular option if you want decorative lighting with very low power consumption. Its flexible design adapts to any location, adding a touch of colour.
This strip is 5 metres long and integrates 300 highly efficient SMD2835 LEDs that consume only 5 watts per metre. The bright, colourful light it emits is distributed at a 120º beam angle. It requires a power supply to operate.
The electronics of the LED strip are covered with epoxy resin, perfectly protecting it against impacts and moisture, which gives it an IP65 protection rating that makes this type of LED lighting perfect not only for indoor spaces, but also for outdoor use.
This LED strip allows cutting every 10 cm, i.e., it enables full utilisation and adaptation of the LED strip to the desired space.
Thanks to its ultra-flat design, this type of LED lighting achieves an ideal effect lighting for all kinds of projects with minimal visual impact. Likewise, the strip includes a 3M adhesive backing that greatly simplifies installation on almost any surface.
The versatility of the 24V DC SMD2835 60LED/m 5m IP65 8mm Width 10cm Cut LED Strip allows a wide range of applications as accent, decorative, or pathway marker lighting. It is widely used in spaces such as façades, pergolas, corridors, display cabinets, shelves, etc.
* For correct operation and to avoid incidents, connections must be protected with some element that insulates against moisture and water.
* The strips should never be switched on while rolled up; this could cause overheating and burn out the LEDs.
*If you are going to install more than 5 continuous metres of this LED strip, it is necessary to cut the jack connector and make a direct connection
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.