5m 24V LED Strip Digital SPI COB in RGBIC 360LED/m 10mm Wide Cut at Every 5cm IP20

The 5m 24V DC RGBIC Digital SPI COB Silicone FLEX LED Strip 360LED/m 10mm Wide Cut at Every 5cm IP65 is a LED strip called Digital because we can control the colour of the LEDs independently. Thanks to the Digital SPI control the strip is able to perform tracking effects, flash, light groups of LEDs independently, so that it provides a more complete range of effects and intensity than conventional COB strips.

Features of the 5m 24V DC RGBIC Digital SPI COB Silicone FLEX LED Strip 360LED/m 10mm Wide Cut at Every 5cm IP65

This LED strip is 5 metres long and uses high brightness COB technology LEDs and a WS2811 control chip. SPI Digital LED strips are strips that have IC integrated circuits that allow them to control the colour and intensity of each group of LEDs separately via the SPI interface (Serial Peripheral Interface). With this particular strip it is possible to control groups of LEDs independently. With this particular strip it is possible to control groups of LEDs independently. To get the most out of the 5m 24V DC RGBIC Digital SPI COB Silicone FLEX LED Strip 360LED/m 10mm Wide Cut at Every 5cm IP65 we need a suitable Digital controller. In addition, this strip is made of high quality materials such as silicone, which makes it more resistant and flexible than conventional strips. All this is summarised in an IP65 protection factor, obtaining the maximum protection against solid external agents and a magnificent protection against liquids, which makes it suitable for use both indoors and outdoors. This great flexibility means that it can be adjusted to the particularities of the space or element to be illuminated, although it is not possible to make right or acute angles.

Advantages of the 5m 24V DC RGBIC Digital SPI COB Silicone FLEX LED Strip 360LED/m 10mm Wide Cut at Every 5cm IP65

Thanks to its extra flat design, this type of LED lighting achieves an ideal lighting effect for all kinds of projects. The versatility of the RGBIC Digital SPI 24V DC COB Silicone FLEX 360 LED/m 5m IP65 Width 10mm Cut 5 cm allows for a variety of applications such as accent lighting, decorative lighting or wayfinding.  This type of strips are very useful in festive spaces such as concert halls, discotheques, facades, pergolas, corridors, showcases, shelves, etc.

* LED strips should never be switched on when they are coiled up, as this could cause overheating and burn out the LEDs.

* For correct operation and to avoid incidents, the connections must be protected with an insulating element against humidity and water.

* It is important to keep in mind that digital controllers for LED strips can only handle a single data output line. If you want to connect two or more digital LED strips to the same controller, you will need a digital signal splitter, which you can find in the accessories section.

* If you are going to install more than 5 continuous meters of this LED strip, it is necessary to cut the jack connector and make a direct connection.

* 20 pixels per meter