This product is discontinued

Below you can find the substitute product or some equivalents.

If you have any queries, please call us on telephone 020 3739 1978.

Range Essential

Wattage 10 W
Voltage Range 12V AC, 12V DC, 24V AC, 24V DC
Lumen 820 lm
Cap Code E27

Wattage
10 W
Voltage Range
12V AC, 12V DC, 24V AC, 24V DC
Lumen
820 lm
Cap Code
E27
Diameter
60 mm
IP Rating
IP20
Battery Operated
No
Dimensions
110 mm x Ø60 mm
Height
110 mm
Luminous Efficiency
82 lm/W
Beam Angle
270º
Colour Rendering Index
80

Dimensions

Dimensions110 mm x Ø60 mm

Downloads

PDF Datasheet 107001_217842 EN
DoC_107001_217842

Certificates and Stamps

Technical Specifications

Mechanical Features
- Cap CodeE27
- The IP protection indicates the level of resistance of a product to dust and water. The higher the number, the more protected it is.
  IP RatingIP20
- LocationIndoor
- ShapeStandard GLS
Electrical Features
- Light SourceE27 Bulb
- Voltage level required for the product to function correctly.
  Voltage Range12V AC, 12V DC, 24V AC, 24V DC
- Wattage10 W
Product Information
- CertificatesCE, RoHS, UKCA, EMC
- Guarantee3 years
- Product SeriesClassic Light
LED Features
- Measures in degrees how light spreads from the source. A wide angle covers more area, while a narrow one is ideal for highlighting details.
  Beam Angle270º
- Measures how accurately a light source displays colours compared to natural light. A high CRI (close to 100) ensures accurate colour rendering.
  Colour Rendering Index80
- Defines the light tone, from warm white to cool white, measured in Kelvin (K).
  Colour Temperature4000K
- Estimated lifespan of the product before it loses performance. Based on optimal, non-continuous use, and measured in hours of operation under controlled conditions.
  Hours40.000 hours
- Light ColourCool White
- Lumen820 lm
- Ratio between light output (lumens) and energy consumed (watts). A high value indicates better efficiency, ideal for saving energy without compromising lighting.
  Luminous Efficiency82 lm/W
Materials and Finishes
- ColourWhite
Driver Information
- WifiNo

Description

The 10W 12/24V E27 A60 LED Bulb 820lm allows you to upgrade from the typical fat threaded bulbs quickly and easily. They operate at 12/24V making them ideal for installations with solar panels.

Their 820 lumens are enough to replace a traditional bulb of up to 70W. This means a saving of more than 85% in electricity consumption.

The light it emits is of high quality as evidenced by its colour rendering index of over 80. The 10W 12/24V E27 A60 LED Bulb 820lm that we present in our online LED lighting shop is totally environmentally friendly and complies with RoHS regulations, as it does not contain lead or mercury.

* For installation in enclosed luminaires, the recommended maximum ON time is half of the maximum time specified in the general terms and conditions.

*The customer’s visual perception of sizes, colors, or textures may be affected by factors such as lighting, screen calibration, or the device used. For this reason, the images are merely illustrative and may not fully reflect the product’s actual characteristics. Please note that some of the ambient photographs shown on the website correspond to real environments, while others may have been generated or edited using artificial intelligence. In no case do they constitute an exact representation of the product or intend to mislead. To learn about the product’s real characteristics, please refer to the technical sheet and product description.

12/24V E27 LED Bulb 10W A60 820 lm

Description