This product is discontinued

Below you can find the substitute product or some equivalents.

If you have any queries, please call us on telephone 020 3739 1978.

Wattage 10 W
Voltage Range 220-240V AC
Lumen 1000 lm
Cap Code E27

Wattage
10 W
Voltage Range
220-240V AC
Lumen
1000 lm
Cap Code
E27
Diameter
60 mm
IP Rating
IP20
Battery Operated
No
Dimensions
110 mm x Ø60 mm
Height
110 mm
Luminous Efficiency
100 lm/W
Beam Angle
180º
Colour Rendering Index
80

Dimensions

Height110 mm
Diameter60 mm

Downloads

Technical Data Sheet PDF
DoC_1111_173818

Certificates and Stamps

Technical Specifications

Electrical Features
- Frequency50-60 Hz
- Light SourceSMD2835
- Minimum and maximum voltage fluctuation that the product can withstand momentarily.
  Nominal Voltage85 V - 265 V
- Voltage level required for the product to function correctly.
  Voltage Range220-240V AC
- Wattage10 W
Mechanical Features
- Cap CodeE27
- The IP protection indicates the level of resistance of a product to dust and water. The higher the number, the more protected it is.
  IP RatingIP20
- LocationIndoor
LED Features
- Measures in degrees how light spreads from the source. A wide angle covers more area, while a narrow one is ideal for highlighting details.
  Beam Angle180º
- Measures how accurately a light source displays colours compared to natural light. A high CRI (close to 100) ensures accurate colour rendering.
  Colour Rendering Index80
- Defines the light tone, from warm white to cool white, measured in Kelvin (K).
  Colour Temperature3000K
- Estimated lifespan of the product before it loses performance. Based on optimal, non-continuous use, and measured in hours of operation under controlled conditions.
  Hours40.000 hours
- Light ColourWarm White
- Lumen1000 lm
- Ratio between light output (lumens) and energy consumed (watts). A high value indicates better efficiency, ideal for saving energy without compromising lighting.
  Luminous Efficiency100 lm/W
- Technology that ensures stable, flicker-free light. It improves visual experience and reduces eye fatigue.
  No FlickerNo Flicker
Materials and Finishes
- ColourWhite
Product Information
- CertificatesCE, RoHS, TÜV
- Guarantee3 years
Driver Information
- WifiNo

Description

The E27 LED Bulb 10W 1000 lm A60 can perfectly replace conventional large screw bulbs of up to 80W.

The SMD2835 LED source it incorporates is capable of producing a brightness of 999 lumens. Made from high-quality PC and aluminium, the E27 LED Bulb 10W 1000 lm A60 holds CE, RoHS, and TUV certifications. The light it emits is distributed very evenly over a 180º angle. Additionally, the opal finish of the diffuser minimises glare.

LED lighting is the most efficient on the market and the safest, as it contains no hazardous substances such as mercury, generates hardly any heat, and has unmatched durability. The E27 LED Bulb 10W 1000 lm A60 is a clear example of a fully eco-friendly product.

* For installation in enclosed luminaires, the maximum recommended operating time is half the maximum time specified in the general conditions.

*The customer’s visual perception of sizes, colors, or textures may be affected by factors such as lighting, screen calibration, or the device used. For this reason, the images are merely illustrative and may not fully reflect the product’s actual characteristics. Please note that some of the ambient photographs shown on the website correspond to real environments, while others may have been generated or edited using artificial intelligence. In no case do they constitute an exact representation of the product or intend to mislead. To learn about the product’s real characteristics, please refer to the technical sheet and product description.

E27 10W LED Bulb A60 1000 lm

Description