This product is discontinued

Below you can find the substitute product or some equivalents.

If you have any queries, please call us on telephone 020 3739 1978.

Range Advanced

Wattage 50 W
Voltage Range 220-240V AC
IP Rating IP67
Dimensions 25 mm x 35 mm x 210 mm

Wattage
50 W
Voltage Range
220-240V AC
IP Rating
IP67
Dimensions
25 mm x 35 mm x 210 mm
Width
35 mm
Height
25 mm
Fitting Material
Aluminium
Current Intensity
2.08 A

Dimensions

Depth210 mm
Height25 mm
Width35 mm

Downloads

Technical Data Sheet PDF
DoC_200_0

Certificates and Stamps

Technical Specifications

Electrical Features
- Current Intensity2.08 A
- Electrical Insulation ClassI
- Frequency50-60 Hz
- It is the amount of voltage the product delivers to its components, such as LEDs or connected devices, for operation. This value is crucial to ensure safe and efficient operation.
  Output Voltage24V DC
- Voltage level required for the product to function correctly.
  Voltage Range220-240V AC
- Wattage50 W
Materials and Finishes
- ColourWhite
- Fitting MaterialAluminium
Mechanical Features
- Temperature range in which the product can operate optimally, ensuring its performance without overheating or damage.
  Ambient Working Temperature-20 °C~+50 °C
- The IP protection indicates the level of resistance of a product to dust and water. The higher the number, the more protected it is.
  IP RatingIP67
- LocationOutdoor
Product Information
- CertificatesCE, RoHS, UKCA
- Guarantee3 years

Description

Waterproof power supply for LED with 24V DC output, rated power of 50 W and current of 2 A; 220–240V AC input. Its IP67 protection and aluminium construction provide resistance to water and dust in demanding applications.

General information on the Waterproof Power Supply 24V DC 50W 2A IP67

This unit converts the 220–240V AC mains into a stabilised 24V DC output to power lighting systems and other low-voltage devices. It operates at 50–60 Hz and belongs to Electrical Insulation Class I. The aluminium body and elongated form factor facilitate integration into technical spaces, while its stated outdoor use broadens installation options. With dimensions of 25 mm x 35 mm x 210 mm, it allows discreet mounting in profiles or junction boxes. IP67 protection ensures sealing against water and dust under typical on-site environmental conditions.

Use and application

In panels and installations requiring a stable 24V DC source, this unit supplies loads within its rated power, offering a constant output for systems that require low-voltage power. For setups where environmental exposure is a factor, its IP67 rating and aluminium body help protect the unit against splashes and particles. Where clean integration is needed, its compact size allows it to be housed in trunking or technical spaces, keeping cabling tidy and maintaining access for inspections.

Key benefits

Conversion from 220–240V AC to 24V DC for stable power.
IP67 ingress protection for environments with moisture and dust.
Aluminium body that enhances overall durability.
Elongated form factor that facilitates mounting in technical spaces.
Insulation Class I for an earth connection in line with the design.
Declared outdoor use that broadens project possibilities.

Highlighted specifications

Input voltage: 220–240V AC; Frequency: 50–60 Hz; Output: 24V DC; Output current: 2 A; Insulation class: I.

Installation and maintenance

Installation must be carried out according to the system indicated by the manufacturer, respecting polarities and isolating the mains before wiring. Connect the input to 220–240V AC and the output to the 24V DC load, ensuring a firm fixing and cable routing that avoids strain. Place the unit in a ventilated, accessible location for periodic inspections. Recommended maintenance includes visual inspection, tightening of terminals, dry exterior cleaning, and verification of connections and cable condition. Disconnect the power before any intervention.

Check the technical characteristics and verify the power and voltage required by your system before confirming the purchase.

Frequently asked questions

What input voltage is declared? — 220–240V AC is declared.
What output voltage is declared? — 24V DC is declared.
What power is declared? — 50 W is declared.
What certifications are declared? — CE, RoHS and UKCA are declared.

*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.

24V DC 50W 2A IP67 Sealed Power Supply