This product is discontinued
Below you can find the substitute product or some equivalents.
If you have any queries, please call us on telephone 020 3739 1978.

Voltage Range
5V DC
Diameter
17 mm
Cut Points
10 cm
LED Strip Installation
2 m
Type Of Dimming
Remote Control
IP Rating
IP65
Battery Operated
No
Dimensions
2000 mm x Ø17 mm
Height
2000 mm
Fitting Material
PCB
Dimmable
Yes
Working Temperature
-20 °C~+40 °C
Ref. Ledkia: 65515
4.5 out of 5 stars
£6.49
2m 5V RGB LED Strip for TV with USB Connection 24LED/m IP20
In Stock, delivery in 24/48h
Dimensions
Downloads
Technical Data Sheet PDF
manual_tiras_led_6_idiomas
DoC_65515_130992
Certificates and Stamps
Technical Specifications
Electrical Features
Mechanical Features
LED Features
Materials and Finishes
Product Information
Driver Information
The 5V RGB LED Strip Kit reduces eye fatigue caused by differences in image brightness. Having lighting behind our monitors or televisions should not be a style decision alone, as the inclusion of this type of lighting in the devices also responds to a need on the part of our eyes. When we are spending hours in front of the monitor in a dark room, with no other light than that emanating from our screen, our eyes can become tired much earlier than normal.
The kit includes 4 5050 SMD LED strips of 50 centimetres together with their cables to connect between them, a USB and the control, with which you can easily alternate the colour of the LEDs, choosing from 20 different shades, as well as different light effects (fade, flash and strobe). The control distance of the remote control is between 8 and 10 metres.
It is very easy to install, equipped with 5V 1A USB, and can be connected directly to the USB port on the back of the TV, to the computer, to the mobile phone charger, and to any usb port without having to find a suitable adapter. Thanks to the 3M sticker that incorporates the strip, simply clean the surface and stick the LED strips to the back of the TV or monitor and connect the USB to the USB interface, the strips will automatically switch on or off with the TV. The kit is ideal for working at night, as it helps to make the brightness of the TV monitor less tiring for our eyes.
*For correct operation and to avoid incidents, the connections must be protected with an insulating element against humidity and water.
*Never turn on the LED strips when they are coiled, this could cause overheating and burn the LEDs.
*The customer’s visual perception of sizes, colors, or textures may be affected by factors such as lighting, screen calibration, or the device used. For this reason, the images are merely illustrative and may not fully reflect the product’s actual characteristics. Please note that some of the ambient photographs shown on the website correspond to real environments, while others may have been generated or edited using artificial intelligence. In no case do they constitute an exact representation of the product or intend to mislead. To learn about the product’s real characteristics, please refer to the technical sheet and product description.