5m 24V DC 385LED/m IP65 CRI90 Super Narrow COB LED Strip 7mm Wide Cut at Every 4cm

The 5m 24V DC 385LED/m IP65 CRI90 Super Narrow COB LED Strip 7mm Wide Cut at Every 4cm  is a very popular choice if you want to have a decorative light that consumes very little energy. Its flexible design adapts to any location where it will add a touch of colour.

Features of 5m 24V DC 385LED/m IP65 CRI90 Super Narrow COB LED Strip 7mm Wide Cut at Every 4cm

The COB strip  has a length of 5 metres and integrates 1925 highly efficient COB technology LEDs that only consume 10W per metre. The light is evenly distributed and thanks to its COB LEDs we achieve a higher lm/W output for the same power than with traditional SMD LEDs. The width of the Super Narrow COB LED Strip is 7mm, so it can be installed in almost any corner of your home. It requires a power supply to operate.

It is worth noting that this strip has a very high colour rendering index (CRI) of 90, so the colours are displayed true to life. Daylight has a CRI of 100. A high CRI is highly recommended in lighting for clothing shops, photo studios or designers, for example.

In addition, its IP65 protection rating means that it can be placed outdoors, due to its high degree of resistance against dust and water. To ensure that this waterproof property is maintained, it is recommended to seal the plugs or rectifiers with a little glue or silicone.

Advantages of the 5m 24V DC 385LED/m IP65 CRI90 Super Narrow COB LED Strip 7mm Wide Cut at Every 4cm

Thanks to its extra flat design, this type of LED lighting achieves an ideal lighting effect for all types of projects with minimal visual impact. In addition, the strip comes with a 3M adhesive strip that makes it very easy to install on almost any surface.

The 5m 24V DC 385LED/m IP65 CRI90 Super Narrow COB LED Strip 7mm Wide Cut at Every 4cm  allows for a variety of applications such as accent lighting, decorative lighting or wayfinding. It sees much use in spaces such as facades, pergolas, corridors, showcases, shelves, etc.

The COB LED strip has a width of 5mm to which a special coating is added to make it water and dust resistant, giving it an IP65 protection rating, making the total width of the strip 7mm. It is one of the thinnest COB LED strips available on the market.

As this LED strip is very thin and has a special coating to make it waterproof, there are no connectors available on the market that perfectly fit it and also ensure IP65 protection. Therefore, the customer will have to use a 5mm IP20 connector or solder the LED strip wires to protect the connection afterwards.

It is important to note that when soldering the LED strip wires, care must be taken not to damage the strip components. It is also essential to protect the connection afterwards to prevent water or dust from entering the strip and causing damage.