Question 1

What IP rating should they have?

Accepted Answer

For a step light installed on a façade or wall exposed to rain, IP65 or higher is recommended. In covered areas, such as porches or protected terraces, IP44 may be sufficient if the luminaire does not receive direct water. IP protection must be accompanied by correct installation and well-insulated connections.

Question 2

At what height should they be installed?

Accepted Answer

In passage areas, stairways or corridors, they are usually installed between 30 and 80 cm from the floor to illuminate the surface directly. On façades or terraces, they can be placed slightly higher if a decorative effect or wider support light is desired. The height should avoid glare and allow the beam to reach the useful area.

Question 3

What wattage is recommended for a Step light?

Accepted Answer

For orientation, stairs and corridors, wattages between 1.5 W and 10 W are usually sufficient, depending on the luminous flux and emission angle. In areas where more visibility is needed, higher-power models can be used, but it is always better to prioritise well-directed optics rather than excessive lumens.

Question 4

What colour temperature is best?

Accepted Answer

In homes, terraces and gardens, warm light from 2700 K to 3000 K is usually the most comfortable. In communal entrances, garages or professional areas, neutral light at 4000 K can improve the perception of details. The most important thing is to maintain consistency with the rest of the luminaires.

Question 5

Are Step lights suitable for illuminating stairs?

Accepted Answer

Yes, they are one of the most suitable solutions for stairs. Installed at low height, they help mark steps and changes in level without taking up space.

Question 6

What is the difference between a Step light and a wall light?

Accepted Answer

A Step light is usually installed at low or medium height and is designed to guide movement or illuminate specific areas of the floor. A wall light is normally placed higher and provides more general lighting for entrances, terraces or façades. Both can be combined if more complete lighting is desired.

Question 7

Can Step lights be combined with ground lights?

Accepted Answer

Yes, this is a very effective combination. Step lights provide functional light for routes or stairs, while ground lights can highlight façades, vegetation or architectural elements. To achieve a balanced result, it is advisable to maintain a similar colour temperature and avoid the light beams crossing in an uncomfortable way.

Step lights

Our featured products from Step lights

Forum 4W Outdoor Aluminium Surface Mounted LED Wall Light

Edulis Square Outdoor Surface Mounted LED Wall Light

Elis 3W Stainless Steel Outdoor Recessed LED Wall Light

Olite 3W Outdoor Recessed LED Wall Light