Question 1

What wattage does an LED path light need?

Accepted Answer

To mark paths or passage areas, many LED path lights work correctly with wattages between 3 W and 10 W, provided they have efficient light distribution. At main entrances, on walls or in areas where more visibility is needed, models from 10 W to 15 W can be used. More than wattage, it is worth checking lumens and beam angle, because two luminaires with the same watts can deliver very different results.

Question 2

What IP rating should an LED path light have?

Accepted Answer

In gardens and exposed outdoor areas, it is recommended to choose path lights with IP65 or higher. This level of protection offers greater safety against rain, irrigation and dust. In semi-covered spaces, such as porches or protected terraces, IP44 may be sufficient if the luminaire does not receive direct water.

Question 3

Is warm or neutral light better for LED path lights?

Accepted Answer

Warm light, between 2700 K and 3000 K, is usually the most suitable option for gardens, terraces, patios and residential areas because it creates a comfortable atmosphere and reduces the feeling of harsh lighting. Neutral light, around 4000 K, is useful in entrances, car parks, residential communities or professional spaces where greater perception of detail is required.

Question 4

How many metres apart should LED path lights be installed?

Accepted Answer

On pedestrian paths, an approximate spacing of 2 to 4 metres between path lights usually provides balanced orientation, although the real distance depends on height, lumens, beam angle and the colour of the paving. A light surface reflects more light than a dark surface, so it may require fewer points. In areas with steps or changes in level, it is advisable to reduce the spacing to improve safety.

Question 5

Can LED path lights be used as main lighting?

Accepted Answer

They can be used as main lighting in gardens, small terraces or outdoor and indoor orientation areas, but they do not always replace higher-output luminaires in areas that require high visibility. Their main function is to mark routes and provide controlled light. In large areas, they are usually combined with other light points.

Question 6

What is the difference between an LED path light and a wall light?

Accepted Answer

An LED path light is usually installed at a low or medium height and is designed to guide movement or illuminate specific areas of the ground. A wall light is normally installed on a wall at a greater height and provides more general or decorative lighting on façades and terraces. In practice, the two can complement each other, as the wall light provides the main light and the path light improves the readability of the route.

Path lights

Our featured products from Path lights

5W Inti Stainless Steal Outdoor Bollard 50cm

Olite 3W Outdoor Recessed LED Wall Light

Olite 3W Square Outdoor Aluminium Recessed LED Wall Light

Adam Round Aluminium Recessed LED Wall Light