Ceiling Rose

How to install ceiling lights correctly and safely?

There is no great difficulty in fitting ceiling lights, but to do it correctly we recommend that you follow the 5 steps that we are going to share with you and in which we will explain the process, whether you have to assemble it yourself or if it is already assembled.

First of all, write down the materials and tools you will need:

• Ladder.
• Drill.
• Drill bits.
• Wall anchors.
• Screws.
• Electrical pliers.
• Clemas or terminal blocks
• Screwdriver.
• Gloves and goggles for protection.

Before you start:

• Don't forget to choose the anchors you need depending on the type of ceiling you have.
• Do not start without disconnecting the electricity supply from the switchboard.

Now you are ready to start:

1. Mark the place where the anchors are to go, using the bracket on the lamp.
2. Drill the holes and place the anchors.
3. Screw the plate to the anchor. You may have to mount the rosette beforehand. To do this, pass the textile cable of the lamp through a cable clamp to prevent it from coming loose due to its weight and fix it to the rosette by means of a clip or cable grip screw that connects the electric cable to the bridge of the rosette.
4. Connect the wires from the ceiling to the wires of the lamp with the help of the power terminals. Blue is the neutral, yellow and green are the earth wires and the third wire, which can be black, grey or brown, is the phase wire.
5. Attach the rosette of the lamp to the bracket that you have previously fixed to the ceiling.

Make sure that the installation of your lamp is secure and, finally, give it a special touch while betting on low consumption with our LED bulbs.