|Team of experts at your service
0
Image of Karl 3W Outdoor Solar LED Wall Light with PIR Sensor
Image of Karl 3W Outdoor Solar LED Wall Light with PIR Sensor
Image of Karl 3W Outdoor Solar LED Wall Light with PIR Sensor
Image of Karl 3W Outdoor Solar LED Wall Light with PIR Sensor
Image of Karl 3W Outdoor Solar LED Wall Light with PIR Sensor

Karl 3W Outdoor Solar LED Wall Light with PIR Sensor

New

13,79 €

Ref: 178352

Colour White

Colour Temperature Warm White 3000K

Pre-Order, estimated shipping from 09/07/2026

Buy now, pay later

Credit payment
Are you a professional? Register and enjoy special conditions.

Dimensions

  • Depth137.6 mm
  • Height35.4 mm
  • Width90.4 mm
Scheme image

Downloads

  • pdf file

    Technical Data Sheet PDF

Certificates and Stamps

CertificateCertificateCertificate

Technical Specifications

  • Mechanical Features

    • Detection distance range8 m
    • Defines the sensitivity area of a sensor in degrees. A wider angle will detect motion over a larger area.
      Detection Range120 °
    • Ability to move or rotate the spotlight to direct the light as desired.
      DirectionalNo
    • Indicates whether the product or its materials are fire-resistant, enhancing safety in high-temperature or flame-risk areas.
      Fire RatedYes
    • InstallationWall
    • The IP protection indicates the level of resistance of a product to dust and water. The higher the number, the more protected it is.
      IP RatingIP65
    • LocationOutdoor
    • SensorPIR
    • Sensor TypePIR
    • Internal temperature range in which the product can operate efficiently and safely. It is important to ensure its reliability under different usage conditions.
      Working Temperature-20 °C~+50 °C

  • Electrical Features

    • Electrical Insulation ClassIII
    • Frequency50-60 Hz
    • Light SourceSMD2835
    • Max Wattage3 W
    • No. Of Lights2
    • Remote ControlNo
    • Voltage level required for the product to function correctly.
      Voltage Range5V DC
    • Wattage3 W

  • Solar Panel Information

    • Solar Panel Power1.15 W
    • Solar Panel Voltage5.5 V
    • Type of Solar PanelMonocrystalline

  • Battery Information

    • Battery life of the luminaire at full charge, without wear, and at medium light level.
      Autonomy35 h
    • Batteries IncludedYes
    • Battery Capacity1200 mAh
    • Battery Voltage3.7 V
    • Time required to fully recharge the product's battery, depending on the battery capacity and the charging source.
      Charging Time6 h
    • Number Of Batteries1
    • Type Of BatteryLi-ion
    • Type Of ChargeSolar

  • LED Features

    • Adjustable Beam Angle70 °-140 °
    • Defines the light tone, from warm white to cool white, measured in Kelvin (K).
      Colour Temperature3000K
    • Estimated lifespan of the product before it loses performance. Based on optimal, non-continuous use, and measured in hours of operation under controlled conditions.
      Hours50.000 hours
    • Light ColourWarm White
    • Lumen350 lm
    • Ratio between light output (lumens) and energy consumed (watts). A high value indicates better efficiency, ideal for saving energy without compromising lighting.
      Luminous Efficiency116 lm/W
    • Number of LEDs21

  • Product Information

    • CertificatesCE, RoHS, UKCA
    • Guarantee3 years

  • Materials and Finishes

    • ColourWhite
    • Fitting MaterialABS Plastic, PC

  • Driver Information

    • WifiNo
Image

Description

A wall lamp that integrates solar technology and a compact geometry, Karl 3W Outdoor Solar LED Wall Light with PIR Sensor presents a clean surface that reads well on façade and boundary walls, while the PIR motion sensor adds purposeful functionality.

General information about Karl 3W Outdoor Solar LED Wall Light with PIR Sensor

Designed as an outdoor wall lamp, this piece combines solar LED lighting with a discreet body that settles neatly on the wall. It incorporates a PIR sensor to activate light based on movement, supporting efficient use in exterior passages and vertical planes. The construction in ABS and PC provides a lightweight feel and a tidy finish that aligns with architectural surfaces. With IP65

Design and visual presence

The design resolves as a compact volume that sits close to the wall, prioritising a clean geometry and a restrained profile over ornament. The ABS and PC housing keeps edges crisp and surfaces consistent, so the piece integrates comfortably on rendered, timber or masonry finishes. Two points of light distribute illumination along the wall plane, reinforcing a vertical rhythm without visual clutter. With its solar panel incorporated, the silhouette remains concise, avoiding the need for external wiring. The visual impact is measured, offering a clear reading of the fixture as part of the architectural envelope and supporting coherent exterior compositions.

Use and applications

Conceived for outdoor projects in gardens, terraces and circulation zones, this wall lamp supports passages and thresholds where light is needed on demand. The PIR motion sensor triggers the source when movement is detected, complementing the solar system and battery operation for autonomous night use. With IP65, it addresses exposure to weather typical of exterior walls, and wall installation keeps the footprint compact. Two points of light help articulate the vertical surface, adding clarity to routes and entries while maintaining a contained appearance.

Key benefits

  • Presence balanced on the wall thanks to a compact body and restrained geometry.
  • Decorative integration in exterior vertical compositions with minimal visual impact.
  • Functional support through PIR activation that responds to movement.
  • Coherent configuration with solar LED and battery operation that avoids external wiring.
  • Adaptable reading for gardens, terraces and exterior transitions.

Highlighted specifications

Material: ABS y PC; Wattage: 3 W; Lumen: 350 lm; Autonomy: 35 h.

Installation and maintenance

Installation is resolved on the wall, following the indicated mounting system and ensuring a stable, sealed fixing on the exterior surface. The solar panel should be oriented to capture sunlight effectively, and the PIR sensor kept unobstructed for reliable detection. Routine care involves keeping the panel and lens clean from dust and debris to maintain performance. Disconnect the power supply before any intervention.

Frequently asked questions

  • What type of installation does it require? — Wall mounting on an exterior vertical surface.
  • How many points of light does it have? — Two points of light for distribution along the wall.
  • Does it include a sensor? — It incorporates a PIR motion sensor for activation on movement.
  • What is the power and light output? — 3 W of power with 350 lm.
  • How is it powered? — Solar panel with integrated battery operation.

Specialized decorative lighting distribution in Ireland. If you are looking to buy Karl 3W Outdoor Solar LED Wall Light with PIR Sensor with a refined decorative approach, it is designed to integrate naturally into different projects. Estimated shipping in 3 to 4 days (subject to stock availability). Check price and availability here.

*The customer’s visual perception of sizes, colors, or textures may be affected by factors such as lighting, screen calibration, or the device used. For this reason, the images are merely illustrative and may not fully reflect the product’s actual characteristics. Please note that some of the ambient photographs shown on the website correspond to real environments, while others may have been generated or edited using artificial intelligence. In no case do they constitute an exact representation of the product or intend to mislead. To learn about the product’s real characteristics, please refer to the technical sheet and product description.