Triac RF/Pushbutton LED Dimmer

The Triac RF/Pushbutton LED Dimmer uses wireless technology in the 2.4 GHz band. It is specially developed for the control of dimmable LED lamps as well as incandescent or halogen lamps without the need for wiring.

Thanks to this dimmer, it is possible to manually change the luminosity of the luminaires, creating various environments for different occasions and needs.

This dimmer can have several control places, either wireless or classic buttons connected by cable.

Characteristics of the Triac RF/Pushbutton LED Dimmer

behind the pushbutton or inside the junction box, as it is only 26 mm thick.

It incorporates two types of dimming, beginning and end of phase. Both can be selected by means of the selector that incorporates the dimmer according to the requirements specified by the lamp used in each case.

The control can be carried out with the RF Controller for 1-10V and Triac dimmer, the LED Universal Switch Dimmer 1-10V and Triac as well as classic buttons.

Operation of the Triac RF/Pushbutton LED Dimmer

The use of the Triac RF/Pushbutton LED Dimmer is very simple. To turn the luminaires on and off you only have to press the button briefly and, when you want to dim the intensity of the luminaire, you have to keep the button pressed until you reach the desired intensity. The dimmer has a memory for storing the brightness at which the luminaire has been switched off.

Don't miss this opportunity, and take advantage of it to enjoy the best quality lighting, accompanied by elegance and style.

* Output power for LED loads or Triac LED Drivers from 100-200W (110-220V).
* Output power for Incandescent and Halogen loads from 200-400W (110-220V).