RF to DALI DT6/DT8 Converter SKYDANCE DA-M

RF to DALI DT6/DT8 Converter SKYDANCE DA-M is classified as a gateway bridging control between RF and DALI dimming. It integrates DALI for intensity/tunable white control and supports RF-based communication. Operates within a -20 °C to +50 °C ambient range.

General information about RF to DALI DT6/DT8 Converter SKYDANCE DA-M

This device acts as a bridge for lighting control systems, converting RF commands into DALI DT6/DT8 control signals for luminaires and drivers operating on a DALI bus. It enables unified regulation of brightness and, when applicable to DT8, colour temperature within a DALI line while maintaining RF-based connectivity from compatible transmitters. Built with PC housing, it is designed for technical installations where reliable integration between wireless control and DALI infrastructure is required.

The unit incorporates DALI as the output signal and supports RF and Wi‑Fi as available interfaces in the system. Certified CE and RoHS, it aligns with professional project needs, combining straightforward configuration with stable system behaviour inside lighting networks.

Use and applications

In lighting projects that require bridging wireless commands to DALI buses, this converter delivers precise control by translating RF inputs into DALI DT6/DT8 dimming. It fits technical installations where centralised integration of luminaires on a DALI backbone is needed, thanks to the DALI output and RF/Wi‑Fi connectivity for upstream communication.

Operate within the specified temperature range and follow DALI bus wiring practices for reliable performance. When the system architecture includes RF transmitters and a DALI line, the converter enables streamlined configuration and commissioning via its supported communication path, ensuring coherent dimming behaviour across connected drivers.

Key benefits

• Bridges wireless commands to DALI networks gracias a la salida DALI DT6/DT8 y comunicación RF.
• Precise dimming performance por el uso de dimming DALI en la línea de control.
• Facilitates system integration mediante conectividad RF y soporte Wi‑Fi en la arquitectura.
• Suitable for professional projects por certificaciones CE y RoHS.
• Reliable operation en entornos técnicos gracias al rango térmico de funcionamiento.

Highlighted specifications

Type of dimming: DALI (DT6/DT8); Connectivity: RF y Wi‑Fi; Working temperature: -20 °C a +50 °C; Housing material: PC.

Installation and maintenance

Carry out the installation according to the indicated wiring system, observing the DALI bus polarity rules and ensuring proper RF pairing within the control architecture. Use appropriate cable section for DALI runs and confirm the ambient range is respected throughout the enclosure placement. After wiring, proceed with system configuration to assign the device within the RF network and DALI line addressing, following standard commissioning steps for consistent control responses. Disconnect the power supply before any intervention.

Specialized lighting distribution in Ireland. If you are looking to buy RF to DALI DT6/DT8 Converter SKYDANCE DA-M with a professional warranty, it is a leading choice for durability and efficiency. Estimated shipping in 3 to 4 days (subject to stock availability). Quality certified by CE, RoHS for professional installations and projects. Check price and availability here.

Frequently asked questions

• What does the converter do — It translates RF commands into DALI DT6/DT8 control signals for connected drivers and luminaires.
• Is it suitable for my project — Verify that your system uses a DALI bus and requires RF-to-DALI bridging within the stated temperature range.
• How should it be wired — Follow DALI bus wiring practices and connect as per the control line diagram of your installation.
• Which environments can it operate in — Use within the ambient working temperature range stated in the specifications.
• Are certifications provided — The product carries CE and RoHS, suitable for professional use where these apply.