5m 12V LED Strip SMD 120LED/m 10W/m 1000lm/W 8mm Wide cut every 2.5cm IP20

Solution oriented to low-voltage LED strips offering 10 W/m power and compatibility with 12V DC supply, designed for indoor linear lighting applications with high LED density.

General information about 5m 12V LED Strip SMD 120LED/m 10W/m 1000lm/W 8mm Wide cut every 2.5cm IP20

This LED strip features a flexible SMD2835 module construction with 120 LEDs per metre, delivering a luminous efficacy of 1000 lm/W. It operates at 12 V DC and consumes 10 W per metre, with cut points every 2,5 cm allowing modular length adjustment. The strip is built on a PCB material base, ensuring good heat dissipation for indoor use. Rated IP20, it is suitable for dry environments and requires a transformer for mains connection. The product supports dimming via a compatible controller, integrating easily into decorative lighting, furniture, shelving, or aluminium profiles without additional protection. Its dimensions are 2 mm by 8 mm width and 5 m length, offering versatility in installation and design.

Use and applications

This LED strip is designed for indoor installations where controlled linear lighting is required. It suits electrical installations and electrical supplies sectors, supported by its 12 V DC compatibility and modular cut intervals. It also fits vehicles, marine, and caravan applications due to its flexible format and low voltage operation.

Thanks to its IP20 rating, it is intended for dry environments, ensuring safety and longevity under appropriate ambient conditions ranging from -20 °C to +40 °C. The strip requires a transformer for mains connection and is compatible with dimming controllers, making it adaptable to various lighting control systems. It offers a practical solution for continuous lighting runs with easy integration and maintenance.

Key benefits

• Facilitates integration in linear lighting thanks to compatibility with 12 V DC systems.
• Permits modular installation with cut points every 2,5 cm for precise length adjustments.
• Simplifies connection and continuity due to flexible PCB construction and transformer power supply.
• Aids installation in indoor dry environments by virtue of IP20 rating.
• Enhances lighting control through compatibility with dimming controllers.

Highlighted specifications

Power consumption per metre: 10 W; LED density: 120 LEDs per metre; Cut interval: 2,5 cm; Operating temperature range: -20 °C to +40 °C.

Installation and maintenance

Installation requires adherence to the specified cut points every 2,5 cm to maintain electrical continuity and performance. The strip must be powered through a transformer suitable for 12 V DC supply. Connection polarity must be observed to avoid damage. The flexible PCB base allows easy mounting on flat surfaces or within profiles designed for LED strips. Maintenance consists primarily of ensuring dry conditions and avoiding mechanical stress.

Disconnect the power supply before any intervention.

Frequently asked questions

• Can the strip be cut to size? — Yes, it can be cut every 2,5 cm at designated points without affecting functionality.
• Is the strip suitable for outdoor use? — No, the IP20 rating indicates it is intended for indoor dry environments only.
• What type of power supply is required? — A transformer providing 12 V DC output is necessary for operation.
• Is dimming supported? — Yes, it supports dimming via compatible controllers.

Specialized lighting distribution in Ireland. If you are looking to buy 5m 12V LED Strip SMD 120LED/m 10W/m 1000lm/W 8mm Wide cut every 2.5cm IP20 with a professional warranty, the S-LITE is a leading choice for durability and efficiency. Estimated shipping in 3 to 4 days (subject to stock availability). Check price and availability here.