Free shipping from € ( )
Digital SPI 12V DC 30LED/m 5m IP67 with Remote Control and Power Supply RGB LED Strip Kit
Before €
€ 23% VAT included.
23% VAT included.Price not available
Units
Sign up para ver los precios exclusivos para profesionales e interioristas
The Digital SPI 12V DC 30LED/m 5m IP67 RGB LED Strip is called Digital because we can control the color of the LEDs independently. Thanks to the Digital SPI control, the strip is capable of tracking effects, flashing, lighting groups of LEDs independently, so it provides a more complete range of effects and colors than conventional RGB strips.
Features of Digital SPI 12V DC 30LED/m 5m IP67 RGB LED Strip
This Digital SPI 12V DC 30LED/m 5m IP67 RGB LED Strip is 5 meters long and uses high brightness SMD5050 technology LEDs. It has a lifetime of approximately 30,000 hours.
SPI Digital LED Strips are strips that have IC integrated circuits that allow them to control through the SPI interface (Serial Peripheral Interface) the color and intensity of each group of LEDs separately. With this particular strip it is possible to control groups of 3 LEDs independently.
It includes a controller with SPI technology that allows to adjust the speed of color change, the intensity of the color mode and the dimming of the light emitted by the LED strip. Using the IC1930 protocol, the RGB Digital LED Strip Controller RGB 12V DC RF Remote Control allows the programming of the sequence of the desired color range, i.e., to perform tracking effects, flash, turn on groups of LEDs independently, etc.
Advantages of Digital RGB LED Strip Controller SPI 12V DC RF Remote Controller
The RF remote control allows you to control the digital LED strip without visual contact between the two, the control has a range of up to 50 meters. It is multi-level, multi-color, flexible control effects and has power input polarity protection. It has 132 dynamic modes, 20 static colors, 10 levels of intensity control and 10 levels of sequential speed control.
This kit includes:
*Digital LED Strip RGB 12V DC 30 LED/m
*RF Remote Digital LED Strip Controller
*Power Supply 60W 12V 5A
Power: | 8 W/m |
Cut every: | 10 cm |
Led Strip Installation: | MAX. 20 m |
Voltage: | 12V DC |
Dimmable: | Remote Control |
Light Source: | SMD5050 |
Number of LEDs: | 30 LED/m |
Light Colour: | RGB |
CRI: | 85 |
Lumens: | 800 lm/m |
Luminous Efficiency: | 100 lm/W |
Energy Efficiency 2021 (UE-1369/2017): | A+ |
Energy Efficiency 2023 (UE-2019/2015): | F |
Beam Angle: | 120º |
Use: | Outdoor |
IP Protection: | IP67 |
Material: | Silicone, PCB, Epoxy Resin |
Size: | 5x12x5000 mm |
Height: | 5 mm |
Width: | 12 mm |
Length: | 5000 mm |
Length: | 5 m |
Working Temperature: | -20°C ~ +45°C |
Life Span: | 30,000 Hours |
Warranty: | 3 Years |
Certifications: | UKCA, CE & RoHS |