Controller for 12/24V CCT LED Strip SKYDANCE V2 compatible with RF Remote

Controller/dimmer for CCT LED strips with RF control, designed for 12 V DC and 24 V DC systems. It supports remote intensity/colour temperature adjustment and a maximum load of 120 W, within compact dimensions for discreet integration.

General information about Controller for 12/24V CCT LED Strip SKYDANCE V2 compatible with RF Remote

This equipment is a two-channel controller that enables dimming and correlated colour temperature tuning on LED strip lighting powered at low voltage. It integrates control of WW/CW channels and accepts a remote as the primary interface via RF communication, facilitating quick commissioning within lighting control schemes. Built with ABS and PC, it is intended for indoor projects and incorporates compliance marks to support reliable operation.

As part of a lighting control architecture, the device focuses on regulation and channel balancing rather than scene management platforms. Its connectivity is wireless point-to-controller, enabling straightforward integration with compatible RF handsets without relying on additional gateways.

Use and applications

The controller manages intensity and CCT on two outputs, ideal for projects where a dedicated handset provides precise adjustments. In professional and residential installations, it brings responsive dimming and temperature balance thanks to its RF communication and low-voltage operation at 12–24 V DC, ensuring suitability for technical lighting layouts that require WW/CW control.

Operation requires a DC power supply within the specified voltage window and correct wiring to the LED strip channels. Once connected, the system allows streamlined control via an RF remote, making setup and later configuration straightforward while respecting the load limit of 120 W.

Key benefits

• Precise light tuning by managing WW/CW channels thanks to two-channel control.
• Flexible placement by using RF wireless linkage to the handset.
• Efficient low-voltage integration by operating at 12–24 V DC for dimming and CCT.
• Compact installation footprint due to its reduced dimensions.
• Confidence in projects by CE, RoHS and UKCA certifications.

Highlighted specifications

Tension: 12 V DC / 24 V DC; Capacidad de carga: 120 W; Dimensiones: 18 mm x 33 mm x 97 mm; Conectividad: RF.

Installation and maintenance

Carry out the installation according to the indicated mounting system, ensuring correct polarity on input and WW/CW outputs during wiring. Use a suitable DC power supply within the stated range and verify secure terminal connections before configuration and pairing with the RF handset. Keep ventilation clear and respect the load limit to preserve operational safety. Disconnect the controller before any service to maintain proper installation standards.

Disconnect the power supply before any intervention.

Specialized lighting distribution in Ireland. If you are looking to buy Controller for 12/24V CCT LED Strip SKYDANCE V2 compatible with RF Remote with a professional warranty, it is a leading choice for durability and efficiency. Estimated shipping in 3 to 4 days (subject to stock availability). Quality certified by CE, RoHS, UKCA for professional installations and projects. Check price & availability.

Frequently asked questions

• What power supply is required — Use a DC power source within the 12–24 V range stated in the specifications.
• How is the LED strip connected — Wire the WW and CW channels to the corresponding outputs, observing polarity on each terminal.
• What is the maximum load — The controller supports up to 120 W total as indicated in the technical data.
• Does it need a gateway — Operation is based on RF remote linkage; verify handset compatibility within the same RF family in the specifications.
• What temperature range is supported — Check the ambient operating limits provided to ensure installation within those conditions.