Free shipping from € ( )
Motion Detector for LED Linear Bar Trunking 60W MERRYTEK MC054V-RC2-A
Price
Before €
€
Price not available
Ref: 6540 / MC031V-1
Motion Detector for 60W Trunking LED Linear Bar. When installed at a height of 15m its detection area is 15 square metres. It supports a maximum load of 800W in multi-voltage.Detection Area: 50% or 100% detection area. With the Merritek MH10 controller you can control functions such as:
Detection Area: Detection Area 50% or 100%.
Hold time: Time it stays on after detecting a movement. 5s ~ 30min.
Stand-by Period: Time that elapses between the luminaire entering Stand-by mode and the luminaire switching off completely.
Stand-by DIM Level: Illumination level in Stand-by mode. After detecting motion, this mode is entered.
Daylight Sensor: Minimum amount of light required for the luminaire to switch on. It can detect that night (5 Lux) or dusk (100-200 Lux) has arrived.
*End cap not included.
Power: | 1.5 W |
Maximum Power: | 800 W |
Voltage: | 220-240V AC |
Multi-Voltage: | 100-277V AC |
Frequency: | 50-60 Hz |
Dimmable: | 1-10 V |
Use: | Outdoor, Indoor |
IP Protection: | IP65 |
Material: | PC |
Detection Distance: | 15 m |
Detection Angle: | 150º-360º |
Working Temperature: | -35ºC~+70ºC |
Warranty: | 3 Years |
Certifications: | UKCA, CE & RoHS |
Brand: | MERRYTEK |