20W Solar LED Luminaire with Motion and Twilight Sensor

The 20W Solar LED Luminaire with Motion and Twilight Sensor is perfect for all kinds of places, especially for those where the mains power supply does not reach. This is because this Solar Luminaire does not need to be connected to the mains.

Features of the 20W Solar LED Luminaire with Motion and Twilight Sensor

Its operation is very simple, this luminaire detects movement and incident sunlight, which is why when the twilight sensor detects that it is night, it will put the luminaire into operation.

For the first 5 hours, the luminaire remains at 30% of its output, when it detects movement, the luminaire switches on at 100%, if after 20 seconds it does not detect any person, it is reduced to 30%, thus saving energy at night.

After the first 5 hours or the battery is less than 30%, the luminaire remains off and when it detects movement, the luminaire switches on at 100%, if after 20 seconds it does not detect any person, it is reduced to 30% for 5 minutes and will switch off, thus saving energy at night.

Motion Sensor Mode, this Solar luminaire incorporates a high capacity battery, which would allow us, assuming adverse weather conditions that do not allow the battery to be charged by the incidence of sunlight for several days, to be on for 3 to 4 days at night for an average of 10-12 hours (the autonomy of the battery will vary according to weather conditions, charge and discharge cycles of the battery, humidity, ambient temperature, etc.).

This is an innovative, high-tech product. Its light source is based on 25 powerful, high-efficiency SMD2835 LEDs that offer very high luminosity for low consumption. The light beam is asymmetrical to make better use of the luminous flux.

As it is a completely self-sufficient and sustainable luminaire, it provides the maximum savings and reduction of electricity consumption possible. The Solar LED Luminaire with Motion and Twilight Sensor 20W is made of high quality and resistant PC. It has an IP65 protection factor against dust and water. In addition, this luminaire has all the components for its operation and installation integrated (LED board, solar panel, LED module, motion and proximity sensor or detection, twilight sensor, connection and disconnection timer, etc).

Take a step further on the road to energy efficiency with the 20W Solar LED Luminaire with Motion and Twilight Sensor and join the clean energy revolution.