The 20W Stainless Steel 12V AC RGB LED Surface Pool Light IP68 is a very interesting option if you want to have special lighting for swimming pools, fountains or water ponds with an important energy saving. It does not require a niche and its fixing is done on the surface by means of a plastic cross support included with the spotlight.

Charcteristics of the 20W Stainless Steel 12V AC RGB LED Surface Pool Light

The luminaire is made of ultra-resistant polycarbonate perfect for UV protection and features a stainless steel frame. Designed to stay underwater for long periods of time counts IP68 protection factor which means it is fully submersible. However, it is not suitable for being installed and used in salt water.

Installing the 20W Stainless Steel 12V AC RGB LED Surface Pool Light

For the LED RGB Surface Spotlights you need a special controller to be able to change the colours to your liking. To correctly light a swimming pool it is recommended to install one RGB 12V AC 20W RGB Surface LED Pool Floodlight every 20m² of water surface.

A 2m long H07RN8-F hose Ø9 mm with two 1.5mm² conductors inside it is used for its power supply. The coating of this tube allows it to be constantly submerged in fresh water or oil.  

* Not suitable for use in salt water.
* It is not advisable to test the product out of water for more than 20 seconds.
* For its correct operation it is necessary to have a suitable power adapter, depending on the colour temperature of the pool light, it works at 12V AC.
* It is necessary to take into account that for its correct installation it is necessary to perforate the wall of the swimming pool to take out the wiring.
* The control uses a 23A battery not included.