Width
6 mm
Height
12 mm
Voltage Range
48V DC
Cut Points
5 cm
LED Strip Installation
15 m
Type Of Dimming
Controller
IP Rating
IP65
Battery Operated
No
Luminous Efficiency
30 lm/W
Fitting Material
PVC
Dimmable
Yes
Ref. Ledkia: 112630
Length 6 m
32,69 €
VAT includedPre-Order, estimated shipping from 05/09/2025
Not Included Controller
Are you a lighting professional or a company?
Buy now, pay later
Credit paymentDimensions
Downloads
Technical Data Sheet PDF
Certificates and Stamps
Technical Specifications
Product Data
Product Information
Technical Information
The 48V DC Green NFLEX6 Neon LED Strip 120LED/m Cut at Every 5cm IP65 perfectly reproduces the visual effect of traditional neon signs. Its flexible design adapts to any location where it will add a touch of colour.
Each meter of this LED Neon Strip 48V DC NFLEX6 IP65 Green IP65 Custom Cut 5 cm integrates 120 highly efficient LEDs with a power consumption of 8W. The hose has a translucent PVC cover that provides uniform light and enhances its optical effect. Its great flexibility allows for easy installation without the need for specific tools, adapting to all kinds of places such as logos or signs, although right angles or acute angles cannot be made. Additionally, thanks to its cutting ability every 5 cm, it can be adjusted to almost any space. In the accessories section, you can find a 48V DC LED intensity regulator to complement your installation, allowing you to precisely control the brightness of the neon strip. The regulator can be controlled by a conventional push-button switch or a radio frequency remote control.
The electronics of the neon strip are perfectly protected against impacts and moisture, providing an IP65 protection rating that makes this type of LED lighting perfect not only for indoor spaces but also for outdoor use.
The 48V DC Green NFLEX6 Neon LED Strip 120LED/m Cut at Every 5cm IP65 is an innovative product that offers lighting with high visual appeal. This, combined with its versatility and high resistance, allows it to bend and create shapes, making this product the ideal lighting for creating any design. It should be noted that it requires a power supply to function and a maximum of 10 metres can be connected with a single power supply.
* The maximum length that can be connected powering one end of the neon strip is up to 10 continuous metres.
* The neon strip can be cut every 5 cm, exclusively in the designated area marked with a line.
* For proper operation and to prevent incidents, connections must be protected with a moisture and water-resistant insulating element.
* Never turn on the strips when they are rolled up, as this could cause overheating and burn the LEDs.
* It is recommended that the strips be placed in ventilated areas without direct exposure to the sun and not exceed 40ºC for correct use.
*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.