Warm White LED Strip 50m 220V AC 100 LED/m Dimmable IP67 Cut at Every 25 cm

The Warm White LED Strip 50m 220V AC 100 LED/m Dimmable IP67 Cut at Every 25 cm does not require any power supply as it is connected directly to the mains via a rectifier cable. Its flexibility allows it to adapt to almost any surface.

Features of the Warm White LED Strip 50m 220V AC 100 LED/m Dimmable IP67 Cut at Every 25 cm

The 100 LED/m SMD 2835 LED strip consumes only 7W per metre. Manufactured with top quality materials, it has the maximum protection against external agents of solid type and a magnificent protection against liquids that are summarized in the IP67 protection factor of the strip that makes it suitable for use both indoors and outdoors.

With the Warm White LED Strip 50m 220V AC 100 LED/m Dimmable IP67 Cut at Every 25 cm a rectifier cable and a strip end cap are included, parts that are recommended to protect the strip properly, with some silicone or a suitable type of sealant, so that the IP67 protection is not compromised. A maximum of 50 metres of LED strip can be connected to a rectifier.

If the strip is to be cut, it must be taken into account that the LED Strip 220V AC 100 LED/m Warm White IP67 can only be cut in complete 25 cm sections and only in the authorised area. Its great flexibility means that it can be adjusted to the particularities of the space or element to be illuminated, although it is not possible to make right angles or acute angles.

Applications of the Warm White LED Strip 50m 220V AC 100 LED/m Dimmable IP67 Cut at Every 25 cm

The Warm White LED Strip 50m 220V AC 100 LED/m Dimmable IP67 Cut at Every 25 cm makes it widely used as secondary lighting and/or decorative element on facades, ceilings, showcases and cabinets, shelves, shop windows, pictures and mirrors and even for marking stairs and corridors. The options are endless.

*For correct operation and to avoid incidents, the connections must be protected with an insulating element against humidity and water.

*LED strips should never be switched on when they are wound up, as this could cause overheating and burn out the LEDs.