Range Essential

Voltage Range 24V DC
Cut Points 10 cm
LED Strip Installation 10 m
Type Of Dimming Controller

1 / 9

Voltage Range
24V DC
Cut Points
10 cm
LED Strip Installation
10 m
Type Of Dimming
Controller
IP Rating
IP20
Battery Operated
No
Dimensions
3 mm x 12 mm x 5000 mm
Width
12 mm
Height
3 mm
Fitting Material
PCB, Epoxy Resin, Silicone
Dimmable
Yes

Light Colour RGBW

RGBW

In Stock, delivery in 15-20 days

Before 36,99 €

-28% (You save 10,20 €)

26,79 €

VAT included

In Stock, delivery in 15-20 days

Are you a lighting professional or a company?

Great discounts off PVP
Extended Warranty
Exclusive Services

See alternatives

Dimensions

Height3 mm
Length5 m
Width12 mm

Downloads

Technical Data Sheet PDF

Certificates and Stamps

Technical Specifications

Technical Information
- Temperature range in which the product can operate optimally, ensuring its performance without overheating or damage.
  Ambient Working Temperature-20 °C~+40 °C
- Quality, safety and compliance certifications that the product has obtained, such as CE, RoHS or UL, which guarantees that it meets industry standards and current regulations.
  CertificatesRoHS, CE, UKCA
- Defines the light tone, from warm white to cool white, measured in Kelvin (K).
  Colour Temperature4000K
- Measurement at which the product can be cut.
  Cut Points10 cm
- DimmableYes
- Electrical Insulation ClassI
- Fitting MaterialPCB, Epoxy Resin, Silicone
- Estimated lifespan of the product before it loses performance. Based on optimal, non-continuous use, and measured in hours of operation under controlled conditions.
  Hours40.000 hours
- The IP protection indicates the level of resistance of a product to dust and water. The higher the number, the more protected it is.
  IP RatingIP20
- Light ColourRGBW
- Luminosity Per Meter1080 lm/m
- Number of LEDs Per Metre60 led/m
- Power Per Meter12 W/m
- Voltage level required for the product to function correctly.
  Voltage Range24V DC
Product Information
- Light SourceSMD5050
- Type Of DimmingController
Product Data
- LocationIndoor
- Warranty3 years

Description

The5m 24V DC 60LED/m IP20 RGBW LED Strip is a popular choice if you want to have a decorative light that consumes very little energy. Its flexible design adapts to any location where it will add a touch of colour.

Characteristics of the 5m 24V DC 60LED/m IP20 RGBW LED Strip

This 5m 24V DC 60LED/m IP20 RGBW LED Strip has a length of 5 metres and integrates 300 high efficient SMD5050 LEDs that consume only 12 watts per metre. The bright and colourful light it emits is spread over an angle of 120º. It requires a power supply to operate. It has a lifespan of approximately 30,000 hours.

To get the most out of the strip you will need a suitable RGBW controller. On the other hand, it requires a power supply in order to function.

Advantages of the 5m 24V DC 60LED/m IP20 RGBW LED Strip

Thanks to its extra flat design, this type of LED lighting achieves an ideal lighting effect for all kinds of projects with minimal visual impact. In addition, the strip includes a 3M adhesive strip that makes it very easy to install on almost any surface.

The versatility of the 5m 24V DC 60LED/m IP20 RGBW LED Strip allows for a variety of applications such as accent lighting, decorative lighting or wayfinding. It sees a lot of use in spaces such as facades, pergolas, corridors, showcases, shelves, etc.

*LED strips should never be switched on when they are coiled, this could cause overheating and burn out the LEDs.

*The customer's visual perception of sizes, colours, textures, and so on, of our products, can be affected by factors such as ambient lighting, screen calibration, viewing angle or the device of each user. The customer must bear in mind that any returns made for reasons not related to the functionality of the product will be at the customer's expense.

5m 24V DC RGBW LED Strip 60LED/m 12mm Wide Cut at Every 10cm IP20

Description